OIL- 2223115 - Caterpillar

TARGET="_parent">Drive Shaft Spline (Center) - Lubricate
Engine Oil Sample - Obtain
Initial 500 Service Hours
Electronic Unit Injector - Inspect/Adjust
Engine Valve Lash - Check
Engine Valve Rotators - Inspect
Transmission Oil Filter - Replace
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours or 3 Months
Cooling System Coolant Sample (Level 1) - Obtain
Differential and Final Drive Oil Level - Check
Differential and Final Drive Oil Sample - Obtain
Engine Oil and Filter - Change
Frame and Body - Inspect
Fuel System Primary Filter - Clean/Replace
Fuel System Secondary Filter - Replace
Fuel Tank Strainer - Clean
Hoses and Clamps - Inspect/Replace
Hydraulic System Oil Filter (Hydraulic Fan Return) - Replace
Hydraulic System Oil Filter (Implement Pilot) - Replace
Hydraulic System Oil Filter (Steering Pilot) - Replace
Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
Hydraulic System Oil Sample (Steering) (Brake) - Obtain
Transmission Oil Sample - Obtain
Every 1000 Service Hours or 6 Months
Battery Hold-Down - Tighten
Drive Shaft Support Bearing - Lubricate
Engine Crankcase Breather - Clean
Fuel Tank Cap Filter - Replace
Rollover Protective Structure (ROPS) - Inspect
Transmission Oil - Change
Transmission Oil Filter - Replace
Every 2000 Service Hours or 1 Year
Axle Breaker Relief Valve - Clean
Brake Accumulator - Check
Cooling System Coolant Sample (Level 2) - Obtain
Differential and Final Drive Oil - Change
Electric Drive Pump (Powered Stairway) Oil - Change
Hydraulic System Oil (Implement) (Hydraulic Fan) - Change
Hydraulic System Oil (Steering) (Brake) - Change
Hydraulic Tank Breaker Relief Valve - Clean
Platform (Powered Stairway) - Lubricate
Receiver Dryer (Refrigerant) - Replace
Service Brake Wear Indicator - Check
Every 3000 Service Hours
Crankshaft Vibration Damper - Inspect
Electronic Unit Injector - Inspect/Adjust
Engine Valve Lash - Check
Engine Valve Rotators - Inspect
Every 3000 Service Hours or 2 Years
Engine Mounts - Inspect
Every 5000 Service Hours or 3 Years
Turbocharger - Inspect
Every 6000 Service Hours or 3 Years
Alternator - Inspect
Cooling System Coolant Extender (ELC) - Add
Cooling System Water Temperature Regulator - Replace
Engine Water Pump - Inspect
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 8500 Service Hours or 850 000L (225 000US gal) of Fuel
Engine Components - Rebuild/Install Reman
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Every 17000 Service Hours or 1700000L (450000US gal) of Fuel
Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New