5S5737 OIL PUMP GROUP Caterpillar parts
D6C
Rating:
Alternative (cross code) number:
CA5S5737
5S-5737
5S5737
CA5S5737
5S-5737
5S5737
Weight: 4 pounds 1 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
SPAKYGIE Oil Pump 9S6590 2260176 5S5737 for Caterpillar D6C D6D D7F D7G
SPAKYGIE ✨Part Number: 9S6590 2260176 5S5737 9S-6590 226-0176 5S-5737 || ✨Fit for CAT Engine: 3306 || ✨Fit for CAT Tractor: D6C, D6D, D6D SR, D6E SR, D7F, D7G, 6A, 6S, 7A, 7S, 7U, 153 || ✨We could provide a variety of engine parts.If you need other parts,please feel free to contact us. || ✨Warranty: 1 Year || ✨Including: 1 x Oil Pump
SPAKYGIE ✨Part Number: 9S6590 2260176 5S5737 9S-6590 226-0176 5S-5737 || ✨Fit for CAT Engine: 3306 || ✨Fit for CAT Tractor: D6C, D6D, D6D SR, D6E SR, D7F, D7G, 6A, 6S, 7A, 7S, 7U, 153 || ✨We could provide a variety of engine parts.If you need other parts,please feel free to contact us. || ✨Warranty: 1 Year || ✨Including: 1 x Oil Pump
Oil Pump 9S-6590 226-0176 5S-5737 for Caterpillar CAT Engine 3306 Tractor D6C D6D D6E D7F D7G
weiwie Part Number:9S-6590 || Application:For Caterpillar CAT Engine 3306 Tractor D6C D6D D6E D7F D7G
weiwie Part Number:9S-6590 || Application:For Caterpillar CAT Engine 3306 Tractor D6C D6D D6E D7F D7G
Oil Pump 9S-6590 226-0176 5S-5737 for Caterpillar CAT Engine 3306 Tractor D6C D6D D6E D7F D7G
PRseaodan Part Number:CA9S6590, 9S-6590, 9S6590, CA2260176, 226-0176, 2260176, CA5S5737, 5S-5737, 5S5737 || Applications:Fit for CAT Loader: 951, 955, 977 || Application:Fit for CAT Tractor: D6C, D6D, D6D SR, D6E SR, D7F, D7G, 6A, 6S, 7A, 7S, 7U, 153
PRseaodan Part Number:CA9S6590, 9S-6590, 9S6590, CA2260176, 226-0176, 2260176, CA5S5737, 5S-5737, 5S5737 || Applications:Fit for CAT Loader: 951, 955, 977 || Application:Fit for CAT Tractor: D6C, D6D, D6D SR, D6E SR, D7F, D7G, 6A, 6S, 7A, 7S, 7U, 153
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 5S5737:
Information:
Generator Alignment
Note: For the alignment procedure for two-bearing close coupled generators, see Special Instruction, SEHS7073, "Alignment Of Two Bearing Generators". Note: A specific alignment procedure is not required for generators that are soft mounted.Align Generator Sets With No Supports At The Flywheel Housing
Illustration 1 g00854158
Generator Set With No Support At The Flywheel Housing (1) Bolts (2) Base
If the base (2) of the generator set is fastened to a foundation, loosen all the bolts that connect the base to the foundation. Loosen all bolts that fasten the generator supports and the engine supports to the base (2).
Ensure that there is clearance between the bolts and the bolt holes in the base, the engine supports and the generator supports at all locations.
Check the clearance between the base and the foundation at all mounting locations. Shims should be used in order to prevent the deflection of the base as the bolts that connect the base to the foundation are tightened. When there is no deflection of the base, tighten all bolts that connect the base to the foundation to the final torque.
Illustration 2 g00854145
(3) Long Support (4) Locations of the Supports
Check the clearance between the base (2) and the engine. Check the clearance between the base (2) and the engine supports. Check the clearance between the base and the generator supports (2). Check the clearance over the entire length of the supports. This is especially important on generators with long supports (3), since some of the surfaces may not be square or parallel. Shims should be used in order to prevent the deflection of the supports as the bolts are tightened. After all the necessary shims have been installed, finish tightening all mounting bolts to the final torque. Align Generator Sets With Supports At The Flywheel Housing
Illustration 3 g00854147
Generator Set With Supports At The Flywheel Housing (1) Bolts (2) Support (3) Base
Illustration 4 g00854174
(4) Bolts (5) Shims
If base (3) of the generator set is fastened to a foundation, loosen all bolts that connect the base (3) to the foundation. Loosen all bolts (4) that fasten the engine supports and generator supports to the base.
Ensure that there is enough clearance between the bolts (4) and the bolt holes in the base (3), engine supports and generator supports (2) at all locations.
Check the clearance between the base (3) and the foundation at all mounting locations. Shims should be used in order to prevent the deflection of the base as the bolts that connect the base to the foundation are tightened. When there is no deflection in the base, tighten all bolts that connect the base to the foundation to the final torque.
Illustration 5 g00854148
(6) Bolts
While the generator is supported by a crane, loosen all bolts (6) that fasten the generator to the flywheel housing. Tighten alternate bolts to the final torque.
Check the clearance between the base and the engine and generator supports at all four locations. Check the clearance over the entire length of the supports. This is especially important on generators with long supports. Shims (5)
Note: For the alignment procedure for two-bearing close coupled generators, see Special Instruction, SEHS7073, "Alignment Of Two Bearing Generators". Note: A specific alignment procedure is not required for generators that are soft mounted.Align Generator Sets With No Supports At The Flywheel Housing
Illustration 1 g00854158
Generator Set With No Support At The Flywheel Housing (1) Bolts (2) Base
If the base (2) of the generator set is fastened to a foundation, loosen all the bolts that connect the base to the foundation. Loosen all bolts that fasten the generator supports and the engine supports to the base (2).
Ensure that there is clearance between the bolts and the bolt holes in the base, the engine supports and the generator supports at all locations.
Check the clearance between the base and the foundation at all mounting locations. Shims should be used in order to prevent the deflection of the base as the bolts that connect the base to the foundation are tightened. When there is no deflection of the base, tighten all bolts that connect the base to the foundation to the final torque.
Illustration 2 g00854145
(3) Long Support (4) Locations of the Supports
Check the clearance between the base (2) and the engine. Check the clearance between the base (2) and the engine supports. Check the clearance between the base and the generator supports (2). Check the clearance over the entire length of the supports. This is especially important on generators with long supports (3), since some of the surfaces may not be square or parallel. Shims should be used in order to prevent the deflection of the supports as the bolts are tightened. After all the necessary shims have been installed, finish tightening all mounting bolts to the final torque. Align Generator Sets With Supports At The Flywheel Housing
Illustration 3 g00854147
Generator Set With Supports At The Flywheel Housing (1) Bolts (2) Support (3) Base
Illustration 4 g00854174
(4) Bolts (5) Shims
If base (3) of the generator set is fastened to a foundation, loosen all bolts that connect the base (3) to the foundation. Loosen all bolts (4) that fasten the engine supports and generator supports to the base.
Ensure that there is enough clearance between the bolts (4) and the bolt holes in the base (3), engine supports and generator supports (2) at all locations.
Check the clearance between the base (3) and the foundation at all mounting locations. Shims should be used in order to prevent the deflection of the base as the bolts that connect the base to the foundation are tightened. When there is no deflection in the base, tighten all bolts that connect the base to the foundation to the final torque.
Illustration 5 g00854148
(6) Bolts
While the generator is supported by a crane, loosen all bolts (6) that fasten the generator to the flywheel housing. Tighten alternate bolts to the final torque.
Check the clearance between the base and the engine and generator supports at all four locations. Check the clearance over the entire length of the supports. This is especially important on generators with long supports. Shims (5)
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts oil Caterpillar catalog:
120, 12F, 140, 14E, 518, 627, 637, 814, 815, 920, 930, 950, 951B, 955K, 955L, 966C, 977K, 980B, D5, D6C, D7F
8S5022
OIL PUMP
12F, 14E, 3306, 627, 637, 814, 815, 816, 966C, 977K, 980B, D5, D6C, D7F, G3306
12F, 14E, 3306, 627, 637, 814, 815, 816, 966C, 977K, 980B, D5, D6C, D7F, G3306
2P0916
OIL FILTER GROUP
120, 12F, 140, 14E, 518, 627, 637, 814, 815, 816, 920, 930, 950, 951B, 955K, 955L, 966C, 977K, 980B, D5, D6C, D7F
120, 12F, 140, 14E, 518, 627, 637, 814, 815, 816, 920, 930, 950, 951B, 955K, 955L, 966C, 977K, 980B, D5, D6C, D7F
5S6683
OIL FILTER AND LINES
12F, 561C, 941, 951B, D4D, D5, D6C
12F, 561C, 941, 951B, D4D, D5, D6C
8S5023
OIL PUMP
561C, D5, D6C
561C, D5, D6C
5S7252
OIL FILTER, COOLER AND LINES
120, 120B, 12F, 140, 140B, 14E, 814, 815, 920, 930, 950, 951B, 955K, 955L, 966C, 977K, D5, D6C, D7F
120, 120B, 12F, 140, 140B, 14E, 814, 815, 920, 930, 950, 951B, 955K, 955L, 966C, 977K, D5, D6C, D7F
2P0915
OIL FILTER AND LINES GROUP
120, 12F, 140, 14E, 814, 815, 816, 920, 930, 951B, 966C, 977K, D5, D6C, D7F
120, 12F, 140, 14E, 814, 815, 816, 920, 930, 951B, 966C, 977K, D5, D6C, D7F
9S1806
OIL FILTER ASSEMBLY
12F, 561C, 941, 951B, D4D, D5, D6C
12F, 561C, 941, 951B, D4D, D5, D6C
7S6639
OIL FILTER ASSEMBLY
12F, 561C, 941, 951B, D4D, D5, D6C
12F, 561C, 941, 951B, D4D, D5, D6C
D6C, D7F
9S3105
OIL PAN SERVICE GROUP
561C, 977K, D5, D6C
561C, 977K, D5, D6C
561C, 920, 930, 941, 951B, D4D, D5, D6C
561C, D5
3N3156
OIL PRESSURE & WATER TEMPERATURE
3304, 3306
3304, 3306
7L0245
OIL COOLER AND LINES
3304, 3306
3304, 3306
2N3934
OIL FILLER, BREATHER AND FUMES DISPOSAL
1673C, 3304, 3306
1673C, 3304, 3306
9L4725
OIL PAN GROUP
1673C
1673C
9L4827
OIL PUMP GROUP
1673C
1673C
9L4320
OIL PUMP
1673C
1673C
9L4329
OIL PUMP ASSEMBLY
1673C
1673C