OIL COOLER LINES 7X2830 - Caterpillar

7X2830 OIL COOLER LINES Caterpillar parts 769C, 771C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7X2830
7X-2830
7X2830

Weight: 0.40 pounds 0 kg.

Buy OIL COOLER LINES 7X2830 Caterpillar genuine, new aftermarket tractor parts with delivery
QUARRY TRUCK, TRUCK,

Compatible equipment models: 7X2830:

QUARRY TRUCK 771C

TRUCK 769C Caterpillar

For full view, you need register

Information:

Table 6
Storage Temperature Expected DEF Life
Below 25° C (77° F) 18 months
25° C (77° F) to 30° C (86° F) 12 months
30° C (86° F) to 35° C (95° F) 6 months
Above 35° C (95° F) test quality before use Refer to "ISO 22241" document series for more information about DEF quality control.Note: Dispose of all fluids according to applicable regulations and mandates.General Characteristics of DEF
For detailed information on the requirements and characteristics of DEF, refer "ISO 22241". For a quick reference, typical characteristics of DEF are given in Table 7.
Table 7
Characteristics for Urea Solutions
Property Unit DEF 32.5 percent
Urea content 32.5 percent (1)
Alkalinity as NH3 Percent 0.2
Density at 20° C (68° F) g/L 1.087 - 1.093 (2)
Refractive Index at 25° C (77° F) 1.381 - 1.384 (3)
Biuret Percent 0.3 max
Aldehydes mg/kg 5 max
Insoluble Matter mg/kg 20 max
Aluminum mg/kg 0.5 max
Calcium mg/kg 0.5 max
Chromium mg/kg 0.2 max
Copper mg/kg 0.2 max
Iron mg/kg 0.5 max
Magnesium mg/kg 0.5 max
Nickel mg/kg 0.2 max
Phosphate (PO4) mg/kg 0.5 max
Potassium mg/kg 0.5 max
Sodium mg/kg 0.5 max
Zinc mg/kg 0.2 max
(1) Acceptable range is 31.8 - 33.2 percent
(2) Target value is 1.090 g/L
(3) Target value is 1.382Coolant Information
The information provided in this “Coolant Recommendation” section should be used with the “Lubricants Information” provided in the latest revision of Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations". This manual may be found on the Web at Safety.Cat.com.The following two types of coolants may be used in Cat diesel engines:Preferred - Cat ELC (Extended Life Coolant)Acceptable - Cat DEAC (Diesel Engine Antifreeze/Coolant)
Never use water alone as a coolant. Water alone is corrosive at engine operating temperatures. In addition, water alone does not provide adequate protection against boiling or freezing.
Standard Factory Fill Fluids
Table 8
Standard Factory Fill Fluids(1)
Compartment or System Oil Viscosities °C °F
Min Max Min Max
Engine Crankcase SAE 10W-30 −18 40 0 104
Hydraulic Systems Cat HYDO Advanced 10 -20 40 -4 104
Final Drive Planetary (Drum) synthetic ISO 220 -20 50 -4 122
Eccentric Weight Housing synthetic ISO 220 -20 50 -4 122
(1) The machine is delivered from the factory with the designated fluids.