OIL 7X7867 - Caterpillar

Illustration 1 g00884774
Air inlet heater for top mounted turbocharger
Illustration 2 g00884777
Air inlet heater for side mounted turbocharger
(1) A suitable locking compound must be applied to the threads of the air inlet heater. The compound that is used on the threads of the air inlet heater must be able to fill the space between the threads and the compound must also be resistant to oil. Note: There is no specific torque for the air inlet heater.Tighten the air inlet heater into the inlet manifold. ensure that the air inlet heater has one thread or less remaining. (2) Check that the electrical terminal is in the correct position. Allow the compound to harden.