OPERATOR AR 1192086 - Caterpillar

1. Remove bolt (2), and pin (3) from each side of ballast box (1). With a lifting device, carefully lower ballast box (1) to rest on a wooden block.2. Attach Tooling (A) and a hoist to the top of the cab assembly. 3. Remove one bolt (4) and two bolts and nuts (5) from each side holding the cab to the frame. 4. Disconnect cable (6) from governor. Loosen jam nut (7). Remove cable from bracket (8). 5. Carefully raise the cab using the hoist until the support bolt holes align with the cab bolt holes. Install one bolt (9) and wooden block (10) on each side of the cab. To lower the operators platform, reverse the tilting steps.