OPERATOR AR-ENCLOSED ROPS 3737791 - Caterpillar

Disconnect harness assembly (20) .
Illustration 13 g01523353
Loosen bolts (21) and bolts (23). Remove bolts (22) and bolts (26). Remove bolts (21) and bolts (23). Remove bracket (24) and bracket (27). Remove wiper motor (25) .Installation Procedure
Illustration 14 g01523353
Install wiper motor (25). Install bracket (27) and bracket (24). Install bolts (26) and bolts (22). Tighten bolts (21) and bolts (23). Tighten bolts (26) and bolts (22) to a torque of 6 1 N m (53 9 lb in).
Illustration 15 g01523333
Connect harness assembly (20) .
Illustration 16 g01523280
Install headliner (19) .
Illustration 17 g01523279
Install screws (18) .
Illustration 18 g01523278
Install screws (17). Repeat this step for the opposite side.
Illustration 19 g01523277
Install screws (16) .
Illustration 20 g01523270
Position fan assembly (15). Connect harness assembly (14). Install plate (13). Install bolts (12) .
Illustration 21 g01523267
Illustration 22 g01523268
Install mirror (11). Install bolts (10) .
Illustration 23 g01523261
Install speaker (9). Connect harness assembly (8). Install screws (7). Repeat this step for the remaining speaker.
Illustration 24 g01523334
Install nuts (6). Tighten nuts (6) to a torque of 57.5 2.5 N m (42 2 lb ft).
Illustration 25 g01523254
Install caps (5) .
Illustration 26 g01523251
Install window wipers (4). Connect hose (3). Install nut (2). Tighten nut (2) to a torque of 23 1 N m (17 1 lb ft). After approximately thirty minutes, torque nut (2) to 23 1 N m (17 1 lb ft). Install nut (1). Tighten nut (1) to a torque of 40 5 N m (30 4 lb ft). After approximately thirty minutes, torque nut (2) to 40 5 N m (30 4 lb ft).Note: To inspect the torque, the torque of nut (2) must be 12 N m (106 lb in) minimum.Note: To inspect the torque, the torque of nut (1) must be 20 N m (177 lb in) minimum.