OPERATORS MANUAL, CAT, 3204 ENG. A07764 - Caterpillar

Illustration 1 g01248546
Illustration 2 g01231979
Press the "OK" key.The dialog that is shown in Illustration 1 is shown.Note: If your system is configured as a Dual GPS system, the dialog that is shown in Illustration 2 is shown.Complete one of the following steps:
Press the arrow keys in order to enter the amount that each press of the vertical offset buttons will increases or decreases the vertical offset.
Press the "Default 0.05" soft key in order to set the system default. The system default is 0.010 m (0.05 ft).Note: If your system is configured as a Dual GPS system, skip Step 4.
Illustration 3 g01231981
Press the "Next" key to highlight the "Target Cross Slope Increment" field.Complete one of the following steps:
Press the arrow keys in order to enter the amount that each press of the vertical offset buttons will increases or decreases the vertical offset.
Press the "Default 0.1%" soft key in order to set the system default. The system default is "0.1%".
Press the "OK" key in order to save the settings and return to the "Setup Menu-Configuration" dialog.
Press the "ESC" key in order to exit the "Plan View". The changes take effect immediately.