3461767 OPTION AR-CONFIGURATION Caterpillar parts
M318D
Rating:
Alternative (cross code) number:
CA3461767
346-1767
3461767
CA3461767
346-1767
3461767
WHEELED EXCAVATOR,
Compatible equipment models: 3461767:
For full view, you need register
Information:
Procedure For Bracket Replacement For 5130 Excavator
Illustration 1. View of 7I-5945 Pump Lines Group (not serviced). Callout (A) indicates 107-0354 Clamp.1. Support the suction lines to allow removal of the bracket assembly.2. Remove six 107-0354 Clamps and existing hardware from former 107-0373 Bracket Assembly (2).3. Remove former 107-0373 Bracket Assembly. Install the new 107-0373 Bracket Assembly (2) which has additional supports welded to the bracket assembly. Add 20 cm (7.87 in) of 5P-6782 Seal-Bulk (1) (not shown) in each semi-circle for the suction tubes.4. Reinstall six 107-0354 Clamps and hardware removed in Step 1. There is no seal material intended between the suction lines and the clamps. Procedure For Bracket Replacement For 5230 Excavator
Illustration 2. View of 106-3610 Pump Lines Group (not serviced). Callout (A) indicates 110-8550 Clamp.1. Support the suction tubes to allow removal of the bracket assembly.2. Remove two 110-8550 Clamps and hardware from former 110-8549 Bracket Assembly (3).3. Remove former 110-8549 Bracket Assembly. Install new 110-8549 Bracket Assembly (3) which has additional supports welded to the bracket assembly. Add 20 cm (7.87 in) of 5P-6782 Seal-Bulk (1) (not shown) in each semi-circle for the suction tubes.4. Reinstall two 110-8550 Clamps and hardware removed in Step 1. Add 19 cm (7.48 in) of 6V-2495 Seal-Bulk (2) (not shown) over each tube under each 110-8550 Clamp.
Illustration 1. View of 7I-5945 Pump Lines Group (not serviced). Callout (A) indicates 107-0354 Clamp.1. Support the suction lines to allow removal of the bracket assembly.2. Remove six 107-0354 Clamps and existing hardware from former 107-0373 Bracket Assembly (2).3. Remove former 107-0373 Bracket Assembly. Install the new 107-0373 Bracket Assembly (2) which has additional supports welded to the bracket assembly. Add 20 cm (7.87 in) of 5P-6782 Seal-Bulk (1) (not shown) in each semi-circle for the suction tubes.4. Reinstall six 107-0354 Clamps and hardware removed in Step 1. There is no seal material intended between the suction lines and the clamps. Procedure For Bracket Replacement For 5230 Excavator
Illustration 2. View of 106-3610 Pump Lines Group (not serviced). Callout (A) indicates 110-8550 Clamp.1. Support the suction tubes to allow removal of the bracket assembly.2. Remove two 110-8550 Clamps and hardware from former 110-8549 Bracket Assembly (3).3. Remove former 110-8549 Bracket Assembly. Install new 110-8549 Bracket Assembly (3) which has additional supports welded to the bracket assembly. Add 20 cm (7.87 in) of 5P-6782 Seal-Bulk (1) (not shown) in each semi-circle for the suction tubes.4. Reinstall two 110-8550 Clamps and hardware removed in Step 1. Add 19 cm (7.48 in) of 6V-2495 Seal-Bulk (2) (not shown) over each tube under each 110-8550 Clamp.