ORIFICE 3G8535 - Caterpillar

TARGET="_parent">Brakes, Indicators and Gauges - Test
Cab Filter (Fresh Air) - Clean/Inspect/Replace
Cooling System Level - Check
Counterweight Cylinder Bearings - Lubricate
Counterweight Hinge Pins - Lubricate
Engine Oil Level - Check
Fairlead Sheave - Lubricate
Fuel System Primary Filter/Water Separator - Drain
Hook and Wire Cable - Inspect
Horn - Test
Hydraulic System Oil Level - Check
Seat Belt - Inspect
Sheave Block Bearings - Lubricate
Undercarriage - Clean
Every 50 Service Hours or Weekly
Cab Filter (Recirculation) - Clean/Inspect/Replace
Track Pins - Inspect
Initial 250 Service Hours
Engine Oil and Filter - Change
Every 250 Service Hours
Engine Oil Sample - Obtain
Winch Frame Mounting - Inspect
Every 250 Service Hours or Monthly
Belts - Inspect/Adjust/Replace
Final Drive Oil Level - Check
Final Drive Oil Level - Check
Fuel Tank Water and Sediment - Drain
Pivot Shaft Oil Level - Check
Recoil Bearings - Lubricate
Track Roller Frame - Inspect
Winch Oil Level - Check
Initial 500 Service Hours
Engine Valve Lash - Check
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Final Drive Oil Sample - Obtain
Final Drive Oil Sample - Obtain
Fuel System Primary Filter - Clean/Replace
Fuel System Secondary Filter - Replace
Fuel System Third Filter - Replace
Hydraulic System Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Cooling System Coolant Sample (Level 1) - Obtain
Engine Oil and Filter - Change
Fuel Tank Cap Filter and Strainer - Replace/Clean
Track - Check/Adjust
Track - Check/Adjust
Every 500 Service Hours or 1 Year
Front Idler Position - Check/Adjust
Winch Oil - Change
Every 1000 Service Hours
Engine Valve Lash - Check
Every 1000 Service Hours or 6 Months
Battery - Inspect
Rollover Protective Structure (ROPS) - Inspect
Every 2000 Service Hours or 1 Year
Final Drive Oil - Change
Final Drive Oil - Change
Hydraulic System Oil - Change
Idler Guide Wear Plates - Inspect
Idler Guide Wear Plates - Inspect
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 2 Years
Cooling System Water Temperature Regulator - Clean/Replace
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Extended Life Coolant - Change