PACKING 0990092 - Caterpillar

Add 5P-0960 Molybdenum Grease to the swing gear and bearing after the installation.Reference: Refer to Operation and Maintenance Manual, "Refill Capacities" for the capacity of the swing gear and bearing.Reference: Refer to Operation and Maintenance Manual, "Swing Gear - Lubricate" for lubricating the swing gear and bearing.Reference: Refer to Operation and Maintenance Manual, "Maintenance Interval Schedule" for the schedule for lubricating the swing gear and bearing.End By: Install the undercarriage frame assembly. Refer to the manufacturer's Disassembly and Assembly Manual for the installation of the undercarriage frame.Installation Procedure For The Swing Gear and Bearing On CIPI Undercarriage Arrangements Which Are Based On 325C Track Type Excavators
Table 3
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7576     Link Bracket     4    
B     132-8223     Hydraulic Pump and Motor (115 V 50/60 Hz Single Phase) (1)     1    
1U-6221 Hydraulic Torque Wrench     1    
132-8143 36 mm Hex Link     1    
( 1 ) 132-8231 Hydraulic Pump and Motor (220 V 50/60 Hz Single Phase) is also available.Note: If the inner dust seal and the outer dust seal were originally dry installed, use the dry installation procedure. If the inner dust seal and the outer dust seal were originally bonded, use the bonded installation procedure.Dry Installation Procedure
Use a wire brush