PAD 1Q8102 - Caterpillar

Illustration 1 g01014908
Text View 1Text View 1 shows the following:
The "Cut" value means that at the center of the blade, 0.05 m (0.164 ft) needs to be cut in order to reach the working surface.
The "Design Elev" (19.13 m (62.76 ft)) is the final target level.
The working surface elevation target is 17.63 m (57.84 ft). The elevation target is offset above the "Design Elev" by the vertical offset of 1.5 m (4.92 ft). The vertical offset is shown on the soft key ("V. Offset:").
Six satellites are being used to generate the position of the blade.The following illustration shows text view 2 configured in order to show position information.
Illustration 2 g01014910
Text View 2Text view 2 shows the following:
"Northing", "Easting", and "Elevation" positions at the center of the blade
The center of the blade is 21.19 m (69.52 ft) from the start of the alignment.
The center of the blade is 1.5 m (4.92 ft) right of the master alignment.Note: In order to see the offset from a selected alignment, set a text view to show the "Offline" item.