2176838 PAD Caterpillar parts
CP-56, CP-573E, CP-64, CP-76, CS-531D, CS-533D, CS-533E
Rating:
Alternative (cross code) number:
CA2176838
217-6838
2176838
CA2176838
217-6838
2176838
Weight: 15 pounds 7 kg.
VIBRATORY COMPACTOR,
Compatible equipment models: 2176838:
Information:
Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7574     Link Bracket     2    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Check the condition of the hydraulic oil cooler prior to installation. Remove any dirt or debris that may restrict the flow of air through the core. If any of the cooling fins are bent, the fins should be straightened prior to the installation of the radiator and hydraulic oil cooler.
Check the condition of the radiator prior to installation. Remove any dirt or debris that may restrict the flow of air through the core. If any of the cooling fins are bent, the fins should be straightened prior to the installation of the radiator and hydraulic oil cooler.
Illustration 1 g00403454
Illustration 2 g00403456
Fasten Tooling (A) to radiator and hydraulic oil cooler (5) . Fasten a suitable lifting device to Tooling (A) .Note: Do not damage the radiator core or the hydraulic oil cooler core when the radiator and hydraulic oil cooler is installed in the machine.
Carefully position the radiator and hydraulic oil cooler (5) in the machine. The weight of the radiator and hydraulic oil cooler is 70 kg (155 lb) .
Install the washers and bolts (6) that hold the radiator and hydraulic oil cooler to the support assembly.
Remove Tooling (A) from the radiator and hydraulic oil cooler.
Connect hose (1) .
Install the fan guards. Refer to Disassembly and Assembly, "Fan Guard - Remove and Install" in this manual.
Connect two hose assemblies (4) .
Connect the radiator bottom hose. Tighten the clamp on the radiator bottom hose.
Connect radiator top hose (3) . Tighten clamp (2) .
Remove the ecology drain valve from the hydraulic oil tank. Fill the hydraulic oil tank to the correct level. Refer to Operation and Maintenance Manual for the correct procedure to fill the hydraulic oil tank.
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual for the correct procedure to fill the cooling system.End By: Install the hood.
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7574     Link Bracket     2    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Check the condition of the hydraulic oil cooler prior to installation. Remove any dirt or debris that may restrict the flow of air through the core. If any of the cooling fins are bent, the fins should be straightened prior to the installation of the radiator and hydraulic oil cooler.
Check the condition of the radiator prior to installation. Remove any dirt or debris that may restrict the flow of air through the core. If any of the cooling fins are bent, the fins should be straightened prior to the installation of the radiator and hydraulic oil cooler.
Illustration 1 g00403454
Illustration 2 g00403456
Fasten Tooling (A) to radiator and hydraulic oil cooler (5) . Fasten a suitable lifting device to Tooling (A) .Note: Do not damage the radiator core or the hydraulic oil cooler core when the radiator and hydraulic oil cooler is installed in the machine.
Carefully position the radiator and hydraulic oil cooler (5) in the machine. The weight of the radiator and hydraulic oil cooler is 70 kg (155 lb) .
Install the washers and bolts (6) that hold the radiator and hydraulic oil cooler to the support assembly.
Remove Tooling (A) from the radiator and hydraulic oil cooler.
Connect hose (1) .
Install the fan guards. Refer to Disassembly and Assembly, "Fan Guard - Remove and Install" in this manual.
Connect two hose assemblies (4) .
Connect the radiator bottom hose. Tighten the clamp on the radiator bottom hose.
Connect radiator top hose (3) . Tighten clamp (2) .
Remove the ecology drain valve from the hydraulic oil tank. Fill the hydraulic oil tank to the correct level. Refer to Operation and Maintenance Manual for the correct procedure to fill the hydraulic oil tank.
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual for the correct procedure to fill the cooling system.End By: Install the hood.
Caterpillar parts catalog:
Parts pad Caterpillar catalog:
7X8009
PAD
CP-533E, CP-56, CP-563, CP-573E, CP-64, CP-663E, CP-74B, CP-76, CS-531D, CS-533C, CS-533D, CS-533E, CS-54, CS-563C, CS-563D, CS-563E, CS-64, CS-663E, CS-74, CS-74B
CP-533E, CP-56, CP-563, CP-573E, CP-64, CP-663E, CP-74B, CP-76, CS-531D, CS-533C, CS-533D, CS-533E, CS-54, CS-563C, CS-563D, CS-563E, CS-64, CS-663E, CS-74, CS-74B
1670634
PAD-DRUM
CP-433C, CP-433E, CP-44, CP-56, CP-573E, CP-663E, CP-76, CS-423E, CS-431C, CS-433E, CS-44, CS-533E, CS-54, CS-56, CS-563E, CS-64, CS-683E, CS-74
CP-433C, CP-433E, CP-44, CP-56, CP-573E, CP-663E, CP-76, CS-423E, CS-431C, CS-433E, CS-44, CS-533E, CS-54, CS-56, CS-563E, CS-64, CS-683E, CS-74
1912287
PAD
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, CB-534C, CB-534D, CB-54, CB-564D, CB-634C, CB-634D, CB-6...
AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, CB-534C, CB-534D, CB-54, CB-564D, CB-634C, CB-634D, CB-6...
1392848
PAD
PM-465
PM-465
1576763
PAD
PF-290B, PS-360B, PS-360C
PF-290B, PS-360B, PS-360C
7R0015
PAD
RR-250, RR-250B
RR-250, RR-250B
7R0016
PAD
RR-250, RR-250B
RR-250, RR-250B
1321998
PAD AS-TRACK
AP-1055D, AP-650B, AP-655D, BG-225C, BG-245C, BG655D
AP-1055D, AP-650B, AP-655D, BG-225C, BG-245C, BG655D
1283451
PAD
AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C
AP-1000B, AP-1055B, AP-900B, BG-2455C, BG-245C
2355253
PAD
AP-1055D, BG-2455D, BG-260D
AP-1055D, BG-2455D, BG-260D
1374129
PAD-DRUM
CS-323C
CS-323C
2405206
PAD
RM-350B
RM-350B
1924278
PAD
AP-1055D, AP-600D, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, SE60 V XW
AP-1055D, AP-600D, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D, SE60 V XW
1966798
PAD
AP-1055D, AP-600D, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D
AP-1055D, AP-600D, AP-655C, AP-655D, AP1000E, AP1055E, AP555E, BG-2455D, BG-260D, BG1000E, BG1055E, BG500E, BG600D, BG655D
2298786
PAD
CB-434D, CB-534D, CB-54, CB-564D, CB-64
CB-434D, CB-534D, CB-54, CB-564D, CB-64