PAD AS 2573130 - Caterpillar

Illustration 1 g01131727
(1) Torque for the 18 bolts ... 270 40 N m (200 30 lb ft) (2) Torque for the two bolts ... 270 40 N m (200 30 lb ft) (3) Torque for the eight bolts ... 135 20 N m (100 15 lb ft) (4) Torque for the eight bolts ... 135 20 N m (100 15 lb ft) (5) Torque for the seven bolts ... 135 20 N m (100 15 lb ft) (6) Torque for the eight bolts ... 55 10 N m (40 5 lb ft) (7) Lubricate the bore lightly with lubricant that is being sealed. (8) Torque for the two bolts ... 475 60 N m (350 45 lb ft) (9) Assemble the retainer with the part number in a visible position. (10) Torque for the six bolts ... 55 10 N m (40 5 lb ft) (11) Torque for the eight bolts ... 135 20 N m (100 15 lb ft) (12) Torque for the three bolts ... 135 20 N m (100 15 lb ft) (13) Lubricate the lip lightly with lubricant that is being sealed.
Illustration 2 g01131768
(14) Apply a 3.0 0.05 mm (0.12 0.002 inch) continuous bead of sealant to the case. Spread the sealant with a roller prior to assembly.Note: Remove any excess sealant that spills over the edge of the case. (15) Apply 5P-3413 Pipe Sealant to the threads prior to the installation of the sensor. Torque for the two locknuts ... 25 5 N m (20 5 lb ft) (16) Apply 5P-3413 Pipe Sealant to the threads prior to the installation of the bolt.