PAD-ABSORBENT 3079923 - Caterpillar

Assembly Procedure
Align marks on housings.
Illustration 1 g01329825
Install thrust washer (12) in case assembly (11) .
Illustration 2 g01329824
Install bevel gear (10) in case assembly (11) .
Illustration 3 g00334074
Install sleeve bearings (7), pinion gears (8), and thrust washers (9) on spider (6) .
Illustration 4 g00334073
Install spider gear assembly (5) .
Illustration 5 g00334072
Install bevel gear (4) and thrust washer (3) .
Illustration 6 g01330115
Install top half (2) of the case assembly.
Illustration 7 g01001783
A new differential group or a new case assembly will be equipped with four bolts and washers that are used for shipping, assembly, and storage purposes only. Remove and discard these four bolts and washers after the bevel gear has been installed. These four bolts and washers should not be used for final assembly.
Install bolts (1) and the washers in order to hold the two halves of the differential case together. Bolts (1) and washers are used to hold the differential case together until final assembly. Remove bolts (1) and washers and discard bolts (1) and washers after installation of the bevel gear.End By: Install the differential and the bevel gear. Refer to Disassembly and Assembly, "Differential and Bevel Gear - Install".