PAD-WEAR 4652495 - Caterpillar

Illustration 4 g01381468
View of the pedal housing from the front without the access panel
The switch is a part of the pedal housing. Remove the access panel in order to access the switch.Parking Brake Solenoid
Illustration 5 g01381805
View of the return manifold (4) from the bottom of the machine
The manifold is mounted to the left hand side of the machine.
The pilot solenoid is located on the manifold (4).Steering Sensors
Illustration 6 g01381470
View of the base for the handle through the rubber boot on the left hand side of the operator's station
The sensors for the joystick steering are located in the base of the joystick. The entire base must be replaced in the event of a sensor failure.Acceleration and Deceleration (Thumb Switch)
Illustration 7 g01381471
View of the handle on the left hand side of the operator's station
The thumb switch is located on the joystick for the transmission.Recall Speed
Illustration 8 g01381473
View of the handle on the left hand side of the operator's station
The switch is the yellow button that is located on the joystick for the transmission.Horn Switch
Illustration 9 g01381474
View of the handle on the left hand side of the operator's station
The horn switch is the black button that is located on the joystick for the transmission.Pump Solenoids
Illustration 10 g01381476
View of the pumps from the left hand side of the machine
(5) Left Hydrostatic Pump
(6) Forward Solenoid
(7) Right Hydrostatic Pump
(8) Forward Solenoid
(9) Reverse Solenoid
(10) Reverse Solenoid The forward and the reverse solenoids for the left motor are located on the front pump. The forward and the reverse solenoids for the right motor are located on the rear pump. The solenoids allow oil to flow to the left side motor and the right side motor.Left Track Motor
Illustration 11 g01381478
View of the front of the left motor through the access panel from the bottom of the machine
The motor can be accessed by removing the panel that is located under the machine.
(11) Left Motor Solenoid
(12) Left Track Speed Sensor The left track speed sensor is located on the front of the left motor.The left motor solenoid is located on the front of the left motor.Right Track Motor
Illustration 12 g01381480
View of the front of the right motor through the access panel from the bottom of the machine
The motor can be accessed by removing the panel that is located on the back of the machine.
(13) Right Motor Solenoid
(14) Right Track Speed Sensor The right track speed sensor is located on the front of the right motor.The right motor solenoid is located on the front of the right motor.Backup Alarm
The backup alarm is mounted on the rear of the machine.
Illustration 13 g01381483
View of the alarm through the panel on the rear of the machine from the corner of the right hand side
Backup alarm - The alarm will sound when the lever for the steering and transmission control is in the REVERSE position. The alarm is used to alert people behind the machine that the machine is backing up.