9P8212 PAD ASSEM. Caterpillar parts
D9H
Rating:
Alternative (cross code) number:
CA9P8212
9P-8212
9P8212
CA9P8212
9P-8212
9P8212
Weight: 57 pounds 26 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$250.14
11 Apr 2022
US: Florida-Parts-Z
9P8212 - PAD ASSEM. 6P2312 for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$193.93
13 Apr 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar PAD 9P8212 New
$173.85
26 Oct 2020
-: -
9P8212 - PAD ASSEM. fits Caterpillar (CAT)
9P8212 Pad
9P8212 Pad
Number on catalog scheme:
5
For full view, you need register
Compatible equipment models: 9P8212:
Information:
System Operation Description:This procedure covers the following diagnostic trouble codes.Note: Refer to Troubleshooting, "Cat ET Service Features" for information about service features.
Table 1
Diagnostic Trouble Codes
CDL Code J1939 Code Code Description Comments
1-2 651-2 Cylinder #1 Injector : Erratic, Intermittent, or Incorrect The code is logged.
The engine Electronic Control Module (ECM) receives a signal from the injector solenoid that is invalid. Or, the ECM receives a signal from the injector solenoid that cannot be accurately interpreted.
The ECM continues to energize the injector solenoid.
1-5 651-5 Cylinder #1 Injector : Current Below Normal The code is logged.
The ECM detects an open circuit.
The ECM continues the attempt to energize the solenoid circuit until the circuit is repaired.
1-6 651-6 Cylinder #1 Injector : Current Above Normal The code is logged.
The ECM detects a short circuit. The ECM will disable the solenoid circuit in order to prevent damage to the circuit.
The ECM disables this solenoid circuit. The ECM will periodically attempt to energize the solenoid circuit until the circuit is repaired.
1-7 651-7 Cylinder #1 Injector : Not Responding Properly The code is logged.
The ECM has determined that the mechanical wear for the injector is out of specifications.
The ECM continues to energize the injector solenoid.
2-2 652-2 Cylinder #2 Injector : Erratic, Intermittent, or Incorrect The code is logged.
The engine ECM receives a signal from the injector solenoid that is invalid. Or, the ECM receives a signal from the injector solenoid that cannot be accurately interpreted.
The ECM continues to energize the injector solenoid.
2-5 652-5 Cylinder #2 Injector : Current Below Normal The code is logged.
The ECM detects an open circuit.
The ECM continues the attempt to energize the solenoid circuit until the circuit is repaired.
2-6 652-6 Cylinder #2 Injector : Current Above Normal The code is logged.
The ECM detects a short circuit. The ECM will disable the solenoid circuit in order to prevent damage to the circuit.
The ECM disables this solenoid circuit. The ECM will periodically attempt to energize the solenoid circuit until the circuit is repaired.
2-7 652-7 Cylinder #2 Injector : Not Responding Properly The code is logged.
The ECM has determined that the mechanical wear for the injector is out of specifications.
The ECM continues to energize the injector solenoid.
3-2 653-2
Table 1
Diagnostic Trouble Codes
CDL Code J1939 Code Code Description Comments
1-2 651-2 Cylinder #1 Injector : Erratic, Intermittent, or Incorrect The code is logged.
The engine Electronic Control Module (ECM) receives a signal from the injector solenoid that is invalid. Or, the ECM receives a signal from the injector solenoid that cannot be accurately interpreted.
The ECM continues to energize the injector solenoid.
1-5 651-5 Cylinder #1 Injector : Current Below Normal The code is logged.
The ECM detects an open circuit.
The ECM continues the attempt to energize the solenoid circuit until the circuit is repaired.
1-6 651-6 Cylinder #1 Injector : Current Above Normal The code is logged.
The ECM detects a short circuit. The ECM will disable the solenoid circuit in order to prevent damage to the circuit.
The ECM disables this solenoid circuit. The ECM will periodically attempt to energize the solenoid circuit until the circuit is repaired.
1-7 651-7 Cylinder #1 Injector : Not Responding Properly The code is logged.
The ECM has determined that the mechanical wear for the injector is out of specifications.
The ECM continues to energize the injector solenoid.
2-2 652-2 Cylinder #2 Injector : Erratic, Intermittent, or Incorrect The code is logged.
The engine ECM receives a signal from the injector solenoid that is invalid. Or, the ECM receives a signal from the injector solenoid that cannot be accurately interpreted.
The ECM continues to energize the injector solenoid.
2-5 652-5 Cylinder #2 Injector : Current Below Normal The code is logged.
The ECM detects an open circuit.
The ECM continues the attempt to energize the solenoid circuit until the circuit is repaired.
2-6 652-6 Cylinder #2 Injector : Current Above Normal The code is logged.
The ECM detects a short circuit. The ECM will disable the solenoid circuit in order to prevent damage to the circuit.
The ECM disables this solenoid circuit. The ECM will periodically attempt to energize the solenoid circuit until the circuit is repaired.
2-7 652-7 Cylinder #2 Injector : Not Responding Properly The code is logged.
The ECM has determined that the mechanical wear for the injector is out of specifications.
The ECM continues to energize the injector solenoid.
3-2 653-2
Caterpillar parts catalog:
Parts pad Caterpillar catalog:
10S, 621H, 621K, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637D, 637E, 637G, 657E, 657G, 824S, 8A, 8S, 9A, D10, D8H, D9G, D9H, D9L
120, 12F, 140, 14E, 621, 623, 627, 631C, 641B, 650B, 657B, 824B, 825B, 826B, 941, 951B, 977K, 983, 988, D7F, D7G, D8H, D9G, D9H
D9E, D9G, D9H
6P5292
PAD
D7G, D8K, D9H
D7G, D8K, D9H
8P4211
PAD ASSEM.
D7G, D8K, D9H
D7G, D8K, D9H
D9H
D8K
1V3854
PAD
815
815
8P9124
PAD ASSEM.
D10, D11N
D10, D11N
8P8931
PAD ASSEM.
D10, D11N
D10, D11N
D7H
D9H
D7G
