PADDLE GP 5546434 - Caterpillar

(1) Lubricate face and thread before assembly. Torque nut to ... 3600 190 N m (2660 140 lb ft)(2) Lubricate inside diameter and outside diameter with clean grease.(3) Bore of cylinder ... 110.00 0.10 mm (4.331 .004 in)(4) Bore of head ... 75.53 0.03 mm (2.974 .001 in)(5) 5I-3063 Bearing: Outside diameter ... 75.140 0.013 mm (2.9583 .0005 in)Inside diameter ... 60.180 0.020 mm (2.3693 .0008 in)Install bearing in bore ... 5.0 0.5 mm (.20 .02 in)(6) 7Y-3428 Bearing: Outside diameter ... 95.180 0.013 mm (3.7472 .0005 in)Inside diameter ... 80.250 0.020 mm (3.1594 .0008 in)Install bearing in bore ... 5.00 0.50 mm (.197 .020)(7) Lubricate sealing lip lightly with lubricant being sealed.(8) Install seals in bore ... 0.5 0.5 mm (.02 .02 in)(9) Apply 4C-4032 Sealant to wiper seal groove before assembly.(10) Diameter of rod ... 74.93 0.03 mm (2.950 .001 in) Minimum plating thickness ... 0.033 0.007 mm (.0013 .0003 in)(11) Slit of ring must turn in direction of piston.