PADLOCK 1C4263 - Caterpillar

Removal Procedure
Start By:
Remove the shell assembly. Refer to Disassembly and Assembly, "Shell Assembly - Remove".
Illustration 1 g02757756
Remove bushings (1) and ring (2). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 350-7768 Electric Hydraulic Pump Gp (115-VOLT) 1
350-7769 Electric Hydraulic Pump Gp (230-VOLT) 1
6V-3175 Double Acting Cylinder 1
4C-9634 Puller Stud 1
9U-6832 Nut 1
4K-0684 Hard Washer 1
123-3804 Bearing Puller Adapter (1) 1
9U-5336 Bearing Puller Adapter (2) 1
(1) Use for Sale Model GSH15B.
(2) Use for Sale Models GSH20B and GSH22B.
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death.
Illustration 2 g02757756Note: Install bushings (1) flush with the housing.
Use Tooling (A) to install one bushing (1).
Install ring (2).
Use Tooling (A) to install the other bushing (1). End By:
Install the shell assembly. Refer to Disassembly and Assembly, "Shell Assembly - Install".