PADLOCK 2851149 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
(A)     1U-7527     Ram     1    
1U-5230 Hand Hydraulic Pump     1    
Illustration 1 g00846866
Place Tooling (A) between the frame and the flywheel housing.
Illustration 2 g00846876
Raise the engine and install rubber mounts (16). Remove Tooling (A) .
Illustration 3 g00846851
Install rubber mounts (15). Install washers and bolts (14) .
Illustration 4 g00846821
Position sheet assembly (13) that is located on the left side of the engine. Install bolts (12) .
Illustration 5 g00846795
Place Tooling (A) between the frame and the flywheel housing. Raise the engine and install rubber mounts (11). Remove Tooling (A) .
Illustration 6 g00846750
Install rubber mounts (10). Install the washers and bolts (9) .
Illustration 7 g00846742
Position sheet assembly (8) and install bolts (7) .
Close the hood and the engine access door that is located on the right side of the engine.
Illustration 8 g00846710
Position sheet (6) and install bolts (5) .
Illustration 9 g00846671
Position sheet (4) and install bolts (3) .
Illustration 10 g00846650
Position sheet assembly (2) and install bolts (1) .