PAINT-TOPCOAT 4589585 - Caterpillar

CONFIDENTIAL TIBU3656-00
TECHNICAL INFORMATION BULLETIN JULY 24, 2002
Small Track-Type Tractors
D3G XL (CFC)
D3G LGP (CFF)
D4G XL (CFN)
D4G LGP (FDC)
D5G XL (FDH)
D5G LGP (FDW)
Component Code: 3033SUBJECT: Acceleration or Deceleration Switch May Stick on 185-1106 or 208-6100 Handles Used on the Transmission/Steering Joystick.
PROBLEM:
Reports from the field indicate that the acceleration or deceleration switches may stick, leading to one or more of the following symptoms:
Logged service codes of CID 1701 FMI 02 (acceleration switch) or CID 1702 FMI 02 (deceleration switch).
Transmission stuck in 1st or 2nd gear.
Transmission will not up shift.
Transmission will not down shift.
SOLUTION:
Caterpillar engineering is aware of this problem and a solution is being investigated. In the meantime, follow this procedure to correct a sticking problem in lieu of, or prior to, replacing the handle.
1. Remove any clear plastic shipping wrap on the handle. This wrap can cause the switch to stick.
COPYRIGHT 2002 CATERPILLAR
ALL RIGHTS RESERVED