PAINT-MUFFLER- 4C4199 - Caterpillar

Illustration 3 g06088752
Lower the temperature of bearings (22). Use Tooling (C) to install bearings (22) to a depth of 10.0 1.0 mm (0.40 0.04 inch).
Illustration 4 g06088747
Illustration 5 g06088761
Use a suitable lifting device to position lift arm assembly (19) onto Tooling (A). The weight of lift arm assembly (19) is approximately 1078 kg (2376 lb).
Illustration 6 g06088749
Install pin assembly (21). Install bolt (20). Repeat this step for the opposite side.
Illustration 7 g06088728
Illustration 8 g06088740
Position lift cylinder (16). Install pin assembly (18). Install bolt (17) and remove the suitable cribbing. Repeat this step for the opposite side.
Illustration 9 g06088726
Illustration 10 g06088727
Top of Cab
Use Tooling (B) and a suitable lifting device to lower tilt cylinder (15). The weight of tilt cylinder (15) is approximately 319 kg (703 lb).
Illustration 11 g06088723
Connect hose assemblies (14).
Illustration 12 g06088722
Connect hose assemblies (13) and (12).
Illustration 13 g06088721
Connect harness assembly (11). Install bolt (10).
Illustration 14 g06088720
Connect tube assembly (9).
Illustration 15 g06088718
Install clamp assembly (8). Install cable straps (7). Connect harness assembly (6).
Illustration 16 g06088717
Install bracket (5) and guard (4). Connect tube assembly (3). Connect harness assembly (2).
Illustration 17 g02724381
Remove Tooling (A) from lift arms (1).End By:
Install the tilt lever.
Install the bucket tilt link.
Install the bucket.