PAINT-YELLOW 4C4207 - Caterpillar

Removal Procedure
Start By:
Release system pressure.
Connect the steering frame lock.
Retain the hydraulic tank oil.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g03646209
Disconnect hose assemblies (3). Remove nuts (1) and brake control valve (2).Installation Procedure
Install brake control valve (2) in the reverse order of removal.
Tighten nut (1) to a torque of 30 7 N m (266 62 lb in).