PAN AS 1726581 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: The turbocharger will be removed from right side of the engine only.
Illustration 1 g01346864
Remove clamp assemblies (2) and bellows assembly (1).
Remove clamp assemblies (4) and bellows assembly (3).
Remove clamp assemblies (6) and hose (5).
Remove the bolt and clip assembly (7). Remove tube assembly (8).
Remove tube assembly (9).
Illustration 2 g01346869
Disconnect tube assemblies (10) and (11).
Illustration 3 g01346870
Remove clamp assemblies (12) and bellows assembly (13).
Remove two bolts (14) and install Tooling (A). Attach a suitable lifting device on turbocharger (15). Remove remaining bolts (14). Remove turbocharger (15). The weight of turbocharger (15) is approximately 80 kg (176 lb).