PAN-OIL 2846026 - Caterpillar

TARGET="_parent">Ejector Cylinder Bearing - Lubricate
Fuel System Primary Filter (Water Separator) - Drain
Hydraulic System Oil Filter Indicator - Check
Tire Inflation - Check
Transfer Gear Oil Level - Check
Initial 250 Service Hours (or at first oil change)
Engine Valve Lash - Check/Adjust
Engine Valve Rotators - Inspect
Oscillating Hitch - Adjust
Every 250 Service Hours or Monthly
Articulation Chassis Cable - Inspect/Replace
Battery - Clean
Belts - Inspect/Adjust/Replace
Differential and Final Drive Oil Level - Check
Drive Shaft Universal Joints, Splines and Bearings - Inspect
Engine Air Filter Service Indicator - Inspect/Replace
Engine Oil and Filter - Change
Engine Oil Sample - Obtain
Frame and Body - Inspect
Fuel System Primary Filter (Water Separator) - Replace
Fuel System Secondary Filter - Replace
Hoses and Clamps - Inspect/Replace
Wheel Nut Torque - Check
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours or 3 Months
Brake Oil Filter - Replace
Case Drain Oil Filter - Replace
Differential and Final Drive Oil Sample - Obtain
Engine Crankcase Breather - Clean
Fuel Tank Cap and Strainer - Clean
Hydraulic System Oil Filter and Screen - Clean/Inspect/Repla
Hydraulic System Oil Sample - Obtain
Hydraulic Tank Breather - Clean/Inspect/Replace
Transfer Gear Oil Sample - Obtain
Transmission Oil Filter - Replace
Transmission Oil Sample - Obtain
Every 1000 Service Hours or 6 Months
Accumulator - Check
Battery Hold-Down - Tighten
Frame and Body Support Pads - Clean/Inspect
Hydraulic System Charge Filter - Replace
Hydraulic System Oil - Change
Oscillating Hitch - Adjust
Rollover Protective Structure (ROPS) and Falling Object Prot
Transmission Oil - Change
Every 2000 Service Hours or 1 Year
Alternate Exit - Inspect
Differential and Final Drive Oil - Change
Engine Mounts - Inspect
Engine Valve Lash - Check/Adjust
Engine Valve Rotators - Inspect
Refrigerant Dryer - Replace
Transfer Gear Oil - Change
Turbocharger - Inspect
Every 3000 Service Hours or 2 Years
Cooling System Coolant Extender (ELC) - Add
Cooling System Coolant Sample (Level 1) - Obtain
Cooling System Pressure Cap - Clean/Replace
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 4 Years
Cooling System Coolant (ELC) - Change
Cooling System Water Temperature Regulator - Replace
Engine Water Pump - Inspect