3072952 PAN AS-SEAT Caterpillar parts
236D, 242D, 246C, 246D, 256C, 257D, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP
Rating:
Alternative (cross code) number:
CA3072952
307-2952
3072952
CA3072952
307-2952
3072952
Weight: 0.65 pounds 0 kg.
COMPACT TRACK LOADER, SKID STEER LOADER,
Compatible equipment models: 3072952:
Information:
Illustration 1 g01069923
Schematic of the Quickshift Enable Switch
Table 1
Status of the Quickshift Switch    
Quickshift Switch    Terminal 1
(N/C)
Wire G758-PU
J1-29    Terminal 3
(N/O)
G759-WH
J1-31    
OFF     Closed     Open    
ON     Open     Closed    Test Step 1. CHECK THE GROUND CIRCUIT OF THE SWITCH IN THE HARNESS.
Turn the key start switch and the disconnect switch to the OFF position.
Disconnect the machine harness connector(s) from the ECM.
Measure the resistance between contact J1-16 (wire 202-BK) of the machine harness for the ECM and the contact 2 (wire 202-BK).
Also measure the resistance between contact J1-16 (wire 202-BK) of the machine harness for the ECM and the contact 5 (wire 202-BK).Expected Result:Both resistances are less than 5 ohms. Results:
OK - Both resistances are less than 5 ohms. The circuit is correct. Proceed to Test Step 2.
NOT OK - Either resistance is greater than 5000 ohms. The circuit is open. The machine harness has failed.Repair: Repair the machine harness or replace the machine harness. Stop.Test Step 2. CHECK THE SWITCH CIRCUITS FOR A SHORT TO THE +BATTERY CIRCUIT.
The machine harness connector(s) remains disconnected from the ECM.
The disconnect switch and the key start switch remain in the OFF position.
Disconnect contact 3 (wire G759-WH) and contact 1 (wire G758-PU) from the connector of the switch.
At the machine harness connector for the ECM, measure the resistance from contact J1-29 (wire G758-PU) and contact J1-31 (wire G759-WH) of the machine harness to all the contacts that are used in the machine harness connectors for the ECM.Expected Result:Each resistance measurement is greater than 5000 ohms.Results:
OK - Each resistance measurement is greater than 5000 ohms. The harness is correct. Proceed to Test Step 3.
NO - One or more of the measurements were less than 5 ohms. There is a short in the machine harness. Repair: The short is between wire G758-PU and the circuit with the lowest resistance measurement or the short is between wire G759-WH and the circuit with the lowest resistance measurement. Repair the machine harness or replace the machine harness. Stop.Test Step 3. CHECK THE SWITCH CIRCUITS IN THE HARNESS.
The machine harness remains disconnected from the ECM and the switch.
At the harness connector for the switch, connect a jumper wire between contact 3 (wire G759-WH) and contact 1 (wire G758-PU).
At the harness connector for the ECM, measure the resistance from contact J1-31 (wire G759-WH) to contact J1-29 (wire G758-PU).Expected Result:The resistance is less than 5 ohms.Results:
OK - The resistance is less than 5 ohms. Proceed to Test Step 4.
NOT OK - The resistance is greater than 5000 ohms. The circuit is open.Repair: The machine harness has failed. Repair the machine harness or replace the machine harness. Stop.Test Step 4. CHECK THE OPERATION OF THE SWITCH.
Remove the jumper that was installed in the previous Test Step.
The machine harness remains disconnected from the switch.
Connect one lead from a multimeter to contact 2 (wire 202-BK) of the harness connector for the switch.
Connect the other lead from a multimeter to contact 3 (wire G759-WH) of the harness connector for
Cat SIS web machinery list:
Parts pan Caterpillar catalog:
3157765
PAN GP-OIL
236B, 236B3, 246C, 252B, 252B3, 256C, 262C, 262C2, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2
236B, 236B3, 246C, 252B, 252B3, 256C, 262C, 262C2, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2
2873921
PAN GP-OIL
236B, 246C, 256C, 262C, 267B, 268B, 272C, 277C, 287C, 297C, 3044C, 3126E
236B, 246C, 256C, 262C, 267B, 268B, 272C, 277C, 287C, 297C, 3044C, 3126E
3879087
PAN GP-OIL
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 308E, 308E CR, 308E SR
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 308E, 308E CR, 308E SR
3175082
PAN GP-OIL
246C, 277C, 287C
246C, 277C, 287C
3160469
PAN GP-OIL
272C, 297C, 299C
272C, 297C, 299C
3355772
PAN GP-OIL
256C, 262C, 272C, 277C, 279C, 287C, 289C, 297C, 299C
256C, 262C, 272C, 277C, 279C, 287C, 289C, 297C, 299C
2873922
PAN AS-OIL
236B, 246C, 256C, 262C, 267B, 268B, 272C, 277C, 287C, 297C, 3044C, 3126E, 906, 906H, 907H, 908, 908H, C3.4
236B, 246C, 256C, 262C, 267B, 268B, 272C, 277C, 287C, 297C, 3044C, 3126E, 906, 906H, 907H, 908, 908H, C3.4
3009449
PAN AS-OIL
236B, 236B3, 246C, 252B, 252B3, 256C, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
236B, 236B3, 246C, 252B, 252B3, 256C, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
3057085
PAN AS-SEAT
246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 299D XHP
246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 299D XHP
3895117
PAN GP-OIL
272D, 272D XHP, 299D, 299D XHP, 910K, 914K
272D, 272D XHP, 299D, 299D XHP, 910K, 914K
3887436
PAN-OIL
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 308E, 308E CR, 308E SR, 308E2 CR
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 308E, 308E CR, 308E SR, 308E2 CR
4328931
PAN AS
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP
3057085
PAN AS-SEAT
246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 299D XHP
246C, 256C, 262C, 262C2, 272C, 272D, 272D XHP, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 299D, 299D XHP
3124554
PAN-OIL
232B, 242B, 247B, 3014, 3024, 304.5, C2.2
232B, 242B, 247B, 3014, 3024, 304.5, C2.2
3009449
PAN AS-OIL
236B, 236B3, 246C, 252B, 252B3, 256C, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
236B, 236B3, 246C, 252B, 252B3, 256C, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C
2873922
PAN AS-OIL
236B, 246C, 256C, 262C, 267B, 268B, 272C, 277C, 287C, 297C, 3044C, 3126E, 906, 906H, 907H, 908, 908H, C3.4
236B, 246C, 256C, 262C, 267B, 268B, 272C, 277C, 287C, 297C, 3044C, 3126E, 906, 906H, 907H, 908, 908H, C3.4
3229487
PAN-SEAT BACK
416E, 422E, 422F, 428E, 428F, 434E
416E, 422E, 422F, 428E, 428F, 434E
3229484
PAN AS
416E, 422E, 422F, 428E, 428F, 434E
416E, 422E, 422F, 428E, 428F, 434E
4460181
PAN GP-OIL
450F, C4.4
450F, C4.4
4328931
PAN AS
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP
3887436
PAN-OIL
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 308E, 308E CR, 308E SR, 308E2 CR
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 308E, 308E CR, 308E SR, 308E2 CR
3895117
PAN GP-OIL
272D, 272D XHP, 299D, 299D XHP, 910K, 914K
272D, 272D XHP, 299D, 299D XHP, 910K, 914K
3633885
PAN-OIL
242B3, 257B3, 259B3
242B3, 257B3, 259B3
2182333
PAN-OIL
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3024C, AP-255E, BB-621C, C2.2, CB-334E, CB-34, CB34B, CB34B XW, CC34B
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3024C, AP-255E, BB-621C, C2.2, CB-334E, CB-34, CB34B, CB34B XW, CC34B