PAN GP-OIL 5398912 - Caterpillar

Removal Procedure
Illustration 1 g02699557
Remove exhaust tube assembly (1) from exhaust elbow (4). Refer to the Original Equipment Manufactures (OEM) for the correct removal procedure.
Remove bolts (5) from exhaust elbow (4). Note: Support the exhaust elbow as the bolts are removed.
Remove exhaust elbow (4) from the engine.
Remove coupling (2) that connects exhaust elbow (4) to turbocharger (3). Installation Procedure
Illustration 2 g02699557
Thoroughly clean exhaust elbow (4), coupling (1) and outlet of turbocharger (3). Inspect the sealing faces of the components for wear or damage. Replace any components that are worn or damaged.
Install coupling (2) to exhaust elbow (4).
Align coupling (2) to the outlet of turbocharger (3). Install assembly of coupling (1) and exhaust elbow (4) to turbocharger (3).
Install new bolts (5) hand tight.
Ensure that coupling (2) is fully engaged into the outlet of turbocharger (3) and into exhaust elbow (4). Ensure that the gap between the turbocharger and the exhaust elbow is evenly spaced.
Tighten bolts (5) to a torque of 44 N m (32 lb ft).
Install exhaust tube assembly (1) onto exhaust elbow (4). Refer to the OEM for the correct installation procedure.