PAN G.-SHALLOW 9B3052 - Caterpillar

Illustration 1 g00939502
The top view of the cab The ROPS has been removed.
Remove the four nuts (1) that hold the existing filter group (2) to the cab. Remove the existing filter group. The four existing studs will be used in order to mount the new filter group.
Illustration 2 g00939503
Tabs
Illustration 3 g00939504
Approximate location of the slot in the filter that is used for engaging the tab
Locate the two tabs on the rear of the cab. Bend the two tabs outward slightly. The two tabs are used for mounting the new filter.
Illustration 4 g00939507
Install the new filter onto the cab.
Illustration 5 g00941536
Side view of the air filter
The 6V-0352 Sealer should be used in two places in order to ensure proper sealing. Use one vertical strip of the sealer on each end of the air filter.