AVSPARE.COM
parts catalog

PANEL A INSTR 0876228 - Caterpillar



0876228 PANEL A INSTR Caterpillar parts PANEL
Rating:
76
Alternative (cross code) number:
CA0876228
087-6228
0876228
Caterpillar 0876228 PANEL A INSTR

Buy PANEL A INSTR 0876228 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Starting the Engine
The engine will not crank:
If the screed lift switch is not in the HOLD (middle) position upon attempted engine start. An E718 error event will be generated.The engine will crank but not start:
One of the emergency stop buttons is depressed, or malfunctioning. There is one emergency stop located on each operator console of the paver. If the paver is equipped with a tamper screed, there is also an emergency stop located on the left and right screed control boxes. An E264 error event code will be generated.Propelling the Machine
The machine will not propel:
If both parking brake switches on the left and right operator consoles are not set to OFF.
If the propel lever trigger is not depressed BEFORE the propel lever is moved out of neutral.
If the propel speed dial is set to zero, in the full counter clockwise position.The operator console will not switch from side to side:
If the machine ECM detects that the propel lever is not in NEUTRAL.
If the machine ECM detects that the machine is still in motion.Auxiliary Functions
When the machine is placed in travel (high) gear, the following functions will not operate:
Hopper UP/DOWN
Conveyor and auger rotation
Auger UP/DOWN
Screed extender IN/OUT from all switch locations
Hydraulic Apron UP/DOWN
Screed RAISE/LOWERThe conveyors and augers will not rotate:
If any of the conveyor or auger switches are held to MANUAL, or OVERRRIDE during engine start. An E374 error event will be generated.The generator will output no power:
If the generator switch is in the ON position during engine start. In this case, this generator switch must be turned OFF, then back ON for the generator to operate.Model Specific Interlocks
When the front engine doors are opened:
The conveyors will not rotate.
The hoppers will not function.When the front doors are opened, no error, or operator sequence code is generated. If the above items are not operating, refer to the troubleshooting section to diagnose the left front door switch.


Parts panel Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.