PANEL-CONTROL 1196828 - Caterpillar

Illustration 2 g03409553
Overview of 310-2636 Auxiliary Hydraulic Lines Gp Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, hose assemblies, harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. Plugging hoses and tubes helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Illustration 3 g03409566
Right side of stick (2) 282-5772 Hose As (4) 288-7689 Tube As (6) 282-5894 Manual Valve Gp (8) 288-7691 Clip As (9) 101-7403 Bolt (10) 1P-3703 Rectangular Seal (11) 6V-0400 Half Flange (13) 7Y-3732 Clip (15) 8T-4139 Bolt (16) 8T-4184 Bolt (18) 8T-4223 Hard Washer (19) 8T-4896 Hard Washer (20) 8T-4910 Bolt
Install lines group onto the right side of the stick.
Illustration 4 g03409583
Left side of stick (1) 277-0917 Hose As (3) 288-7688 Tube As (6) 282-5894 Manual Valve Gp (7) 288-7690 Clip As (9) 101-7403 Bolt (10) 1P-3703 Rectangular Seal (12) 6V-9746 O-Ring Seal (14) 7Y-4868 Clip (17) 8T-4195 Bolt (18) 8T-4223 Hard Washer (19) 8T-4896 Hard Washer (20) 8T-4910 Bolt
Install lines group onto the left side of the stick.
Unless specified, tighten all hardware and fittings to standard torque.ReferenceTorque Specifications, SENR3130, "Torque Specifications"
Illustration 5 g00687600
Inspect the fittings for hydraulic oil leaks.