1263375 PANEL-AIR CONDITIONER Caterpillar parts
312B L, 315B L, 320B, 322B L, 322B LN, 325B L, 330B L, 345B L
Rating:
Alternative (cross code) number:
CA1263375
126-3375
1263375
CA1263375
126-3375
1263375
Weight: 0.60 pounds 0 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
GUOHOQIX Driver Side Fog Light for Kia for Optima 2011-2013 126-3375
GUOHOQIX Part Number:11-1283-69FY4,GM2806901 || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Installation: This item use a plug-and-play design, which is very easy to install without any professional skills. || Preferable Construction: Made from sturdy materials for reliable performance. || Advanced Technology: Incorporates the advancements for preferable function. || Consistent Performance: Delivers reliable results in assorted driving conditions. || Accuracy Engineering: Designed for accurate suitability and optimal performance. || Appearance: With a stylish design, our fog lights make your car cooler and unique. || Material: This item are made of excellent materials, serviceable and reliable, providing you with safe driving protection.
GUOHOQIX Part Number:11-1283-69FY4,GM2806901 || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Installation: This item use a plug-and-play design, which is very easy to install without any professional skills. || Preferable Construction: Made from sturdy materials for reliable performance. || Advanced Technology: Incorporates the advancements for preferable function. || Consistent Performance: Delivers reliable results in assorted driving conditions. || Accuracy Engineering: Designed for accurate suitability and optimal performance. || Appearance: With a stylish design, our fog lights make your car cooler and unique. || Material: This item are made of excellent materials, serviceable and reliable, providing you with safe driving protection.
HHJPBPB Driver Side Fog Light for Kia for Optima 2011-2013 126-3375
HHJPBPB Part Number:11-1283-69FY4,GM2806901 || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Installation: This item use a plug-and-play design, which is very easy to install without any professional skills. || Preferable Construction: Made from sturdy materials for reliable performance. || Advanced Technology: Incorporates the advancements for preferable function. || Consistent Performance: Delivers reliable results in assorted driving conditions. || Accuracy Engineering: Designed for accurate suitability and optimal performance. || Appearance: With a stylish design, our fog lights make your car cooler and unique. || Material: This item are made of excellent materials, serviceable and reliable, providing you with safe driving protection.
HHJPBPB Part Number:11-1283-69FY4,GM2806901 || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Installation: This item use a plug-and-play design, which is very easy to install without any professional skills. || Preferable Construction: Made from sturdy materials for reliable performance. || Advanced Technology: Incorporates the advancements for preferable function. || Consistent Performance: Delivers reliable results in assorted driving conditions. || Accuracy Engineering: Designed for accurate suitability and optimal performance. || Appearance: With a stylish design, our fog lights make your car cooler and unique. || Material: This item are made of excellent materials, serviceable and reliable, providing you with safe driving protection.
CYHWLPOT Driver Side Fog Light for Kia for Optima 2011-2013 126-3375
CYHWLPOT Part Number:11-1283-69FY4,GM2806901 || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Installation: This item use a plug-and-play design, which is very easy to install without any professional skills. || Preferable Construction: Made from sturdy materials for reliable performance. || Advanced Technology: Incorporates the advancements for preferable function. || Consistent Performance: Delivers reliable results in assorted driving conditions. || Accuracy Engineering: Designed for accurate suitability and optimal performance. || Appearance: With a stylish design, our fog lights make your car cooler and unique. || Material: This item are made of excellent materials, serviceable and reliable, providing you with safe driving protection.
CYHWLPOT Part Number:11-1283-69FY4,GM2806901 || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Installation: This item use a plug-and-play design, which is very easy to install without any professional skills. || Preferable Construction: Made from sturdy materials for reliable performance. || Advanced Technology: Incorporates the advancements for preferable function. || Consistent Performance: Delivers reliable results in assorted driving conditions. || Accuracy Engineering: Designed for accurate suitability and optimal performance. || Appearance: With a stylish design, our fog lights make your car cooler and unique. || Material: This item are made of excellent materials, serviceable and reliable, providing you with safe driving protection.
This part in 10 request:
Show.
This information for suppliers only!
2025-07-18
2024-10-25
2024-03-15
2024-03-15
2023-12-30
2021-03-01
2020-01-21
2019-07-18
2018-11-12
2018-09-24
Number on catalog scheme:
6
For full view, you need register
1263375
Images:
Compatible equipment models: 1263375:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A(1) 9U-6198 Crankshaft Turning Tool 1
A(2) 9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
B 136-4632 Engine Timing Pin 1
268-1966 Adaptor 1
C 364-9107 Fuel Injection Pump Timing Pin 1
(1) The Crankshaft Turning Tool is used on the front pulley.
(2) This Tool is used in the aperture for the electric starting motor.Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Ensure that wiring harness are correctly routed and the cable straps are not over tightened. Over tightening of the cable straps will damage the wiring harness convoluting.
Illustration 1 g01967538
If necessary, use Tooling (A) in order to rotate the crankshaft so that number one piston is at top dead center on the compression stroke. Refer to System Operation, Testing and Adjusting, "Fuel Injection Timing - Check". Use Tooling (B) in order to lock the crankshaft so that number one piston is at top dead center position.
If necessary, install Tooling (C) in order to lock the fuel injection pump in the correct position.
Position a new gasket (17) (not shown) onto front housing (16).
Position bolt (15) and spacer (14) onto fuel injection pump (10).
Carefully install fuel injection pump (10) to front housing (16). Ensure that the bore in front housing (16) is not damaged as the fuel injection pump is installed. Note: The fuel injection pump should be supported by hand as the nuts and bolts are installed.
Tighten bolt (15) for fuel injection pump (10) finger tight.
Install nut (13) to fuel injection pump (10) finger tight.
Install new bolts (17) to fuel injection pump (10) finger tight.
Tighten bolts (17) and bolts (15) to a torque of 22 N m (195 lb in). Tighten nut (13) to a torque of 22 N m (195 lb in).
Illustration 2 g01967536
Remove Tooling (C) from fuel injection pump (10). Install a new O-ring seal (9) (not shown) to plug (8).
Remove Tooling (B) from the cylinder block. Install a new O-ring seal to the plug for the cylinder block. Install the plug to the cylinder block. Tighten the plug to a torque of 21 N m (186 lb in).
Install plug (8) to fuel injection pump (10). Tighten the plug to a torque of 14 N m (124 lb in).
Remove the appropriate caps in order to install fuel injection line (11). Install a new fuel injection line (11) to the fuel injection pump and to the fuel manifold. Refer to Disassembly and Assembly, "Fuel Injection Lines - Install" for the correct procedure.
Connect harness assembly (1) to the
Table 1
Required Tools
Tool Part Number Part Description Qty
A(1) 9U-6198 Crankshaft Turning Tool 1
A(2) 9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
B 136-4632 Engine Timing Pin 1
268-1966 Adaptor 1
C 364-9107 Fuel Injection Pump Timing Pin 1
(1) The Crankshaft Turning Tool is used on the front pulley.
(2) This Tool is used in the aperture for the electric starting motor.Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Ensure that wiring harness are correctly routed and the cable straps are not over tightened. Over tightening of the cable straps will damage the wiring harness convoluting.
Illustration 1 g01967538
If necessary, use Tooling (A) in order to rotate the crankshaft so that number one piston is at top dead center on the compression stroke. Refer to System Operation, Testing and Adjusting, "Fuel Injection Timing - Check". Use Tooling (B) in order to lock the crankshaft so that number one piston is at top dead center position.
If necessary, install Tooling (C) in order to lock the fuel injection pump in the correct position.
Position a new gasket (17) (not shown) onto front housing (16).
Position bolt (15) and spacer (14) onto fuel injection pump (10).
Carefully install fuel injection pump (10) to front housing (16). Ensure that the bore in front housing (16) is not damaged as the fuel injection pump is installed. Note: The fuel injection pump should be supported by hand as the nuts and bolts are installed.
Tighten bolt (15) for fuel injection pump (10) finger tight.
Install nut (13) to fuel injection pump (10) finger tight.
Install new bolts (17) to fuel injection pump (10) finger tight.
Tighten bolts (17) and bolts (15) to a torque of 22 N m (195 lb in). Tighten nut (13) to a torque of 22 N m (195 lb in).
Illustration 2 g01967536
Remove Tooling (C) from fuel injection pump (10). Install a new O-ring seal (9) (not shown) to plug (8).
Remove Tooling (B) from the cylinder block. Install a new O-ring seal to the plug for the cylinder block. Install the plug to the cylinder block. Tighten the plug to a torque of 21 N m (186 lb in).
Install plug (8) to fuel injection pump (10). Tighten the plug to a torque of 14 N m (124 lb in).
Remove the appropriate caps in order to install fuel injection line (11). Install a new fuel injection line (11) to the fuel injection pump and to the fuel manifold. Refer to Disassembly and Assembly, "Fuel Injection Lines - Install" for the correct procedure.
Connect harness assembly (1) to the
Caterpillar parts catalog:
Parts panel Caterpillar catalog:
1415415
PANEL AS
320B, 320B FM LL, 320B L, 322B L, 325B L, 330B L, 345B II
320B, 320B FM LL, 320B L, 322B L, 325B L, 330B L, 345B II
1353015
PANEL (OUTER)
320B FM LL, 322B L, 325B L, 330, 330 L, 330B L
320B FM LL, 322B L, 325B L, 330, 330 L, 330B L
1353014
PANEL (INNER)
320B FM LL, 322B L, 325B L, 330, 330 L, 330B L
320B FM LL, 322B L, 325B L, 330, 330 L, 330B L
12H ES, 140H ES, 140H NA, 143H, 14H NA, 160H, 160H ES, 160H NA, 330B L, 350, 966F II, 973, 973C, D6R, D7R
1735432
PANEL
320B FM LL, 320C FM, 325B L, 325C, 325C L, 325D MH, 330B L, 330C L, 330C MH, 330D MH, 345B, 345B II, 345B II MH, 345C, 345C MH, 350 L, 365B, 365B II, 365C L MH, 375 L, 385C L MH, M325B, M325C MH, M325...
320B FM LL, 320C FM, 325B L, 325C, 325C L, 325D MH, 330B L, 330C L, 330C MH, 330D MH, 345B, 345B II, 345B II MH, 345C, 345C MH, 350 L, 365B, 365B II, 365C L MH, 375 L, 385C L MH, M325B, M325C MH, M325...
1501389
PANEL-HEATER
320B, 322B L, 325B L, 330B L, 345B L
320B, 322B L, 325B L, 330B L, 345B L
1602147
PANEL GP-INSULATION
320B, 325B L, 330B L, 345B L
320B, 325B L, 330B L, 345B L
1481281
PANEL GP-FUSE
320B, 325B L, 330B L
320B, 325B L, 330B L
1805558
PANEL
320C FM, 325B L, 325C, 325C L, 325D MH, 330B L, 330C L, 330C MH, 330D MH, 345B, 345B II, 345B II MH, 345C, 345C MH, 365B, 365B II, 365C L MH, 375 L, 385C L MH, M325B, M325C MH, M325D L MH, M325D MH, M...
320C FM, 325B L, 325C, 325C L, 325D MH, 330B L, 330C L, 330C MH, 330D MH, 345B, 345B II, 345B II MH, 345C, 345C MH, 365B, 365B II, 365C L MH, 375 L, 385C L MH, M325B, M325C MH, M325D L MH, M325D MH, M...
1288909
PANEL AS-CONTROL
345B, 345B II, 345B II MH, 345B L, W345B II
345B, 345B II, 345B II MH, 345B L, W345B II
1090330
PANEL AS-VALVE COVER
330, 330B L, 350
330, 330B L, 350
1261684
PANEL AS
330, 330B L, 350
330, 330B L, 350
1485562
PANEL AS
312B L, 315B L, 317B LN, 318B
312B L, 315B L, 317B LN, 318B
1361016
PANEL AS
312B L, 315B L, 317B LN, 318B
312B L, 315B L, 317B LN, 318B
312B L, 315B FM L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 321B, 322B L, 322B LN, 325B L, 330B L, 5110B, M325B, W330B
1285869
PANEL
307
307
1302259
PANEL AS
307
307
1233054
PANEL
M312, M315, M318, M320
M312, M315, M318, M320
2015401
PANEL
301.5
301.5
2015400
PANEL
301.5
301.5
2015399
PANEL
301.5
301.5
2015397
PANEL
301.5
301.5
1134014
PANEL
311B, 312B L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B L, 321B, 322B L, 322B LN, 325B, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B, 5090B, 5110B, 539, M325B, W3...
311B, 312B L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B L, 321B, 322B L, 322B LN, 325B, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B, 5090B, 5110B, 539, M325B, W3...
1352185
PANEL
311B, 312B L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 321B, 322B L, 322B LN, 325B, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B, 5090B, 5110B, 539, M325B, W330B, W34...
311B, 312B L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 321B, 322B L, 322B LN, 325B, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B, 5090B, 5110B, 539, M325B, W330B, W34...