PANEL AS 1295210 - Caterpillar

Loaded Trucks
This is the total number of trucks that are counted in the selected time range. Trucks are recorded by pressing a payload store button. Passes Per Truck
This is the average number of loader buckets per truck in the trucks loaded field. The value is = (the number of loader buckets / the number of trucks that were loaded). This assumes that a consistent size of truck is loaded during this process. Truck To Truck
This is the average duration of time that is measured between presses of a payload store button. Only those trucks that were stored in the same shift are averaged. All trucks that are interrupted by a labeled delay code or a change of shift are discarded. This field assumes that a consistent size of truck is loaded throughout the reporting period. Due to exceptions, this value may differ from the equation Total time / number of trucks loaded. Total Time
The figures in this row measure data with respect to the complete shifts or the entire 24 hour day. The base of time that is used for this calculation is total time. Total time includes production and all delay times. Material/60 Min
Average tonnage of material moved per 60 minute hour within the selected time range. This average equation is Material moved / time base for the row. Annotations correspond to localized settings. The corresponding localized settings are "T" for Metric or "Ton" for English .Trucks Loaded/60 Min
This is the average number of trucks that were stored during a 60 minute hour within the selected time range. Trucks are recorded by pressing the onboard payload store button. The average equation is Number of trucks loaded / time base for the row. This field assumes that a truck of consistent size was loaded throughout the report for the time range. Bank Volume/60 Min
Average bank cubic yards, or bank cubic meters of the material moved per 60 minute hour within the selected time range. The densities of the material that are used to convert the weight to a volume are contained in the configuration. The view/change option of the configure menu is used to set these options. If a material density is not available, the default of 2.1 tons per cubic yard will be used. The units and annotations correspond to the localized settings. The corresponding localized settings are "bcm" for Metric or "bcy" for English.Fuel Usage
All parameters that are related to fuel usage are not supported by PCS.Detailed Reports
Illustration 33 g01526592
Detail report screen for the payload of the loaderThe three forms of the detail reports are listed below: Cycle - This report includes only loader cycle records.Status - This report includes only status records.Combined - This report includes loader cycle records and status records.For each report template, either the "Date/Time" or the "SMH" range can be selected.The header page will contain a list of the criteria that is selected for the report. If the shift based time range is used, the selected shifts are also listed.Summary of Material
Material
This