PANEL AR-CONTROL 1515550 - Caterpillar

Illustration 1 g01058402
(1) 217-3601 Shims (2) 227-0172 Mount Note: Use the shim in table 1 below between the frame and the drum support (3). Install the shims in all four locations in order to ensure that the drum does not contact the drum support. Use either (4) 8T-6381 Bolts or 7X-2566 Bolts to secure the shims and supports to the frame. If the bolts bottom out, use 7X-2566 Bolts to ensure a good bolted joint. When shims are properly installed, the mounts should measure 101.6 1.5 mm (4 0.06 inch) between the mounting surfaces.
Table 1
Shims    
142-4416     Shim    
3 mm (0.12 inch)    
Illustration 2 g01058406
The change is effective with the following Paving Compactor:
CB-334D (S/N: 3JZ244-UP)
CB-334D (S/N: 4CZ600-UP)
CB-335D (S/N: BBW316-UP)
CB-335D (S/N: 5PZ530-UP)The change is adaptable to the following Paving Compactor:
CB-334D (S/N: 3JZ1-243)
CB-334D (S/N: DCZ120-172)
CB-334D (S/N: 4CZ1-599)
CB-335D (S/N: BBW1-315)
CB-335D (S/N: 5PZ1-529)