PANEL GP 1668059 - Caterpillar

Illustration 1 g01392303
Illustration 2 g01392304
View A-ADirection of rotation for the electric starting motor from the pinion end ... ClockwiseNo load conditions at 25 °C (77 °F) Speed ... 7643 1683 rpm Current draw ... 67.5 7.5 Amp Voltage ... 23 V (B) Clearance between the pinion and the housing ... 9.1 mm (0.36 inch) (1) Final installation torque for the ground terminal nut ... 30.5 3.5 N m (270 30 lb in) (2) Final installation torque for the ground terminal nut ... 2.25 0.25 N m (20 2 lb in)Note: A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (3). A maximum of two of the cable terminals may be equal to or greater than 0 AWG. (3) Final installation torque for the battery terminal nut ... 30.5 3.5 N m (270 30 lb in)Note: The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. (4) Final installation torque for the switch terminal nut ... 2.25 0.25 N m (20 2 lb in) (5) Final installation torque for the motor terminal nut ... 30.5 3.5 N m (270 30 lb in) (6) Final installation torque for the bolt on the motor frame terminal ... 8 3 N m (70 27 lb in)Solenoid assemblyCurrent consumption at 20 V and 25 °C (77 °F) Pull-in windings ... 56.5 4.5 Amp Hold-in windings ... 14.6 Amp