PANEL AS 1715417 - Caterpillar

(1) Install sleeve bearings to a depth of 5.0 0.5 cm (1.97 0.20 inch). (2) Apply lubricant to the face and to the threads before assembly. Torque for nut ... 6500 650 N m (4794 479 lb ft) (3) Apply lubricant to the face and to the threads before assembly. Torque for nut ... 600 130 N m (443 96 lb ft) (4) Lubricate the sealing lip with the lubricant that is being sealed. (5) Apply Tooling (E) to the groove before the cylinder is assembled.Installation Procedure
Table 3
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-0520     Driver Gp     1    
Illustration 14 g01208904
Install valve assembly (19). Connect tube assembly (18). Install support assembly (17) .
Illustration 15 g01208902
Lower the temperature of sleeve bearing (16). Use Tooling (A) to install sleeve bearing (16). Install sleeve bearing (16) until sleeve bearing (16) is flush with the bore of the sprocket.
Install grease fitting (15) .
Repeat Steps 2 and 3 in order to install sleeve bearing (16) and grease fitting (15) to the remaining sprocket.
Illustration 16 g01208901
Install sprocket (13) with the grease fitting toward the counterweight cylinder. Install pin (14) .
Illustration 17 g01208900
Install sprocket (12) with the grease fitting toward the counterweight cylinder.
Illustration 18 g01208899
Install plate (11) .
Illustration 19 g01208893
Attach a suitable lifting device to counterweight cylinder (6). The weight of counterweight cylinder (6) is approximately 170 kg (375 lb).
Illustration 20 g01208896
Position counterweight cylinder (6). Install pin (10) and bolt (9) .
Illustration 21 g01208895
Install band assembly (8) .
Illustration 22 g01208890
Connect hose assemblies (5) and (7) to counterweight cylinder (6). Connect tube assembly (4). Install clip (3) .
Illustration 23 g01208888
Illustration 24 g01208889
Attach a suitable lifting device to chain assembly (1). The weight of chain assembly (1) is approximately 61 kg (135 lb). Position chain assembly (1) .
Install bolt (2). Tighten bolt (2) to a torque of 98 10 N m (72 7 lb ft).