PANEL AS- 2204541 - Caterpillar

Tab button - Use the tab button in order to change the active screen between the main screen, the configuration screen, and the diagnostic summary screen.Installation of Object Detection Software on Touch Screen Display
Table 7
Touch Screen Display Parts Numbers
Part Number Description
373-2281 Display Module Gp
441-5131 Display Module Gp
459-2220 Electronic Control Gp Note: The touch screen display will be flashed through an Ethernet connection using an FL2 file. It cannot be flashed though a CDL connection. If there are multiple touch screen displays on a machine, disconnect the Ethernet connection on the display you do not intend to flash to ensure that the correct display has the software loaded.
Illustration 35 g06120806
Rear View of Touch Screen Display
(1) Camera
(2) Power
(3) Ethernet 1
(4) Ethernet 2
(5) CDL connections
Illustration 36 g03585364
Front View of Touch Screen Display
The procedure to install Object Detection Software on Touch Screen Display is as follows :
Illustration 37 g06120808
(6) 425-6889 Cable As
(7) 479-4193 Wiring Cable Assembly
Use a 305-5528 Wiring Harness or 425-6889 Cable As to flash the display using CAT ET Ethernet flashing capabilities.
Connect the service connector end of the cable to the machines Ethernet capable service port and the other end to your PC.Note: On machines without an ethernet capable service port, a 479-4193 Wiring Cable Assembly will have to be used. Attach one end of the 479-4193 Wiring Cable Assembly to the 425-6889 Cable As and the other end to the Ethernet 2 port on the back of the display. Proceed with the following instructions.
Illustration 38 g03585370
Open CAT ET and change the settings in Preferences to Ethernet Connection and select the appropriate Network Connection. The Preferences window can be opened by selecting "Utilities" then "Preferences" and selecting "Modify".
Illustration 39 g03585371
Enter WinFlash by selecting the WinFlash icon.
WinFlash will detect all ECMs with an Ethernet connection.
Illustration 40 g03585372
Browse to the desired flash file and select Begin Flash.Note: Prior to installing Object Detection on 373-2281 Display Module Gp (OBJECT DETECTION, VISION), a wash file must be used. Please use the wash file 502-4019 Engine Ratings Electronic Software Gp available on SIS web under "Service Software Files" section.
Illustration 41 g03585375
Flashing will take several minutes. Do not interrupt the flash and ensure that the display remains powered through the entire process. The FL2 file has the ability to update the displays operating system version. If an out of date or incompatible version of OS is detected the flash will automatically update.
Illustration 42 g03585377
Once the flash is complete, the display will extract the files and reboot. Before returning to CAT ET for servicing set the Preferences back to CDL.