2318133 PANEL Caterpillar parts
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 247B, 247B3, 252B, 252B3, 257B, 257B3, 259B3, 267B, 268B
Rating:
Alternative (cross code) number:
CA2318133
231-8133
2318133
CA2318133
231-8133
2318133
Weight: 0.75 pounds 0 kg.
COMPACT TRACK LOADER, SKID STEER LOADER,
Compatible equipment models: 2318133:
Information:
Which Generate This Code: 3176C and 3196 EnginesThe Electronic Control Module (ECM) detects all of the following conditions:
Coolant temperature is greater than 105 °C (221 °F) for more than four seconds.
The engine has been running more than three minutes. This three minute delay begins once the engine speed is within 50 rpm of low idle. 3406E and 3456 EnginesThe Electronic Control Module (ECM) detects all of the following conditions:
Coolant temperature is greater than 107 °C (225 °F) for more than four seconds.
The engine has been running more than three minutes. This three minute delay begins once the engine speed is within 50 rpm of low idle.System Response:The ECM will log the warning. The ECM will transmit a warning to the display in the cab. The ECM will reset the warning when the coolant temperature falls 2 °C (3.6 °F) below the trip point for four seconds.
Low power
There may be a problem with the cooling system.
There may be a problem with the coolant temperature sensor.Test Step 1. Check for Diagnostic Codes
Connect the Caterpillar Electronic Technician (Cat ET) to the service tool connector.
Turn the keyswitch to the ON position. The engine should be OFF.
Check for any active diagnostic codes or logged diagnostic codes.Expected Result:No diagnostic codes are present.Results:
OK - Proceed to Test Step 2.
Not OK - Repair: Repair the diagnostic codes that are present. Refer to the appropriate topic in the "Troubleshooting With a Diagnostic Code" section of this manual.Ensure that the repair eliminates the problem.STOPTest Step 2. Perform a Check of the Cooling System
Perform a check of the cooling system. Refer to Troubleshooting, "Coolant Temperature is Too High" for possible causes.Expected Result:There are no problems with the cooling system.Results:
OK - There may be an intermittent problem.Repair: Monitor the operation of the engine.Repair the problem.Ensure that the repair eliminates the problem.STOP
Not OK - Repair: Repair the problem.Ensure that the repair eliminates the problem.STOP
Coolant temperature is greater than 105 °C (221 °F) for more than four seconds.
The engine has been running more than three minutes. This three minute delay begins once the engine speed is within 50 rpm of low idle. 3406E and 3456 EnginesThe Electronic Control Module (ECM) detects all of the following conditions:
Coolant temperature is greater than 107 °C (225 °F) for more than four seconds.
The engine has been running more than three minutes. This three minute delay begins once the engine speed is within 50 rpm of low idle.System Response:The ECM will log the warning. The ECM will transmit a warning to the display in the cab. The ECM will reset the warning when the coolant temperature falls 2 °C (3.6 °F) below the trip point for four seconds.
Low power
There may be a problem with the cooling system.
There may be a problem with the coolant temperature sensor.Test Step 1. Check for Diagnostic Codes
Connect the Caterpillar Electronic Technician (Cat ET) to the service tool connector.
Turn the keyswitch to the ON position. The engine should be OFF.
Check for any active diagnostic codes or logged diagnostic codes.Expected Result:No diagnostic codes are present.Results:
OK - Proceed to Test Step 2.
Not OK - Repair: Repair the diagnostic codes that are present. Refer to the appropriate topic in the "Troubleshooting With a Diagnostic Code" section of this manual.Ensure that the repair eliminates the problem.STOPTest Step 2. Perform a Check of the Cooling System
Perform a check of the cooling system. Refer to Troubleshooting, "Coolant Temperature is Too High" for possible causes.Expected Result:There are no problems with the cooling system.Results:
OK - There may be an intermittent problem.Repair: Monitor the operation of the engine.Repair the problem.Ensure that the repair eliminates the problem.STOP
Not OK - Repair: Repair the problem.Ensure that the repair eliminates the problem.STOP
Cat SIS web machinery list:
Parts panel Caterpillar catalog:
2186430
PANEL GP-SIDE
216B, 216B3, 226B, 226B3, 236B, 236B3, 242B, 247B, 247B3, 267B, 268B
216B, 216B3, 226B, 226B3, 236B, 236B3, 242B, 247B, 247B3, 267B, 268B
2186428
PANEL GP-SIDE
232B, 242B, 242B3, 247B, 257B, 257B3, 259B3
232B, 242B, 242B3, 247B, 257B, 257B3, 259B3
2298744
PANEL GP-SIDE
216B, 216B3, 226B, 226B3, 232B, 242B, 242B3, 247B, 247B3, 257B, 257B3, 259B3, 267B
216B, 216B3, 226B, 226B3, 232B, 242B, 242B3, 247B, 247B3, 257B, 257B3, 259B3, 267B
2185790
PANEL AR-INSTRUMENT
216, 216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
216, 216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
2186429
PANEL GP-SIDE
236B, 252B, 252B3, 267B, 268B
236B, 252B, 252B3, 267B, 268B
3282270
PANEL GP-INSTRUMENT
216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3
216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3
2164751
PANEL GP-INSTRUMENT
216, 216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
216, 216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
2185791
PANEL AR-INSTRUMENT
216, 216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
216, 216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
1586694
PANEL
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287
1586697
PANEL
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287
2213881
PANEL GP-FUSE
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
2213880
PANEL GP-FUSE
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
2213880
PANEL GP-FUSE
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
2213881
PANEL GP-FUSE
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
216B, 226B, 232B, 236B, 242B, 247B, 252B, 257B, 267B, 268B
3367533
PANEL AS-GAUGE
416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
2061681
PANEL AS
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
2061679
PANEL AS
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 450E
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 450E
2061682
PANEL-CONTROL
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 450E, 450F
2344768
PANEL AS
TH210, TH215
TH210, TH215
2359652
PANEL AS
TH210, TH215
TH210, TH215
2356802
PANEL AS
TH210, TH215
TH210, TH215
2349067
PANEL AS
416D, 420D, 430D
416D, 420D, 430D
2420090
PANEL AS
446D
446D
2450645
PANEL AS-SOLAR
420D, 420E
420D, 420E