PANEL AS 2339392 - Caterpillar

(1) Clearance between ejector plate (2) and body (3)(new) ... 12.0 mm (0.47 inch)(minimum) ... 6.0 mm (0.24 inch)Wear plate (4) must be replaced when clearance (1) is less than ... 6.0 mm (0.24 inch). Failure to replace wear plates (4) at this stage of wear may result in premature wear of the ejector cylinders. All other ejector body wear plates should be replaced when the plate is worn to within ... 6 mmof the parent metal.(5) Locate this edge ... 5 mmshort of the full extension of the ejector plate. (6) Distance from bottom of ejector body stop plate to measuring point (7) ... 150 mm (6.0 inch)(7) Stop plate width measured at point (6)(new) ... 37 mm (1.46 inch)(minimum) ... 33 mm (1.30 inch)Stop plate thickness measured from body(new) ... 20 mm (0.79 inch)(minimum) ... 10 mm (0.39 inch)