PANEL GROUP 2505594 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     2    
Heat the ring gear to a maximum temperature of 315 °C (599 °F). Install the ring gear on the flywheel. Position the ring gear with the part number toward the crankshaft. Allow the ring gear to cool. Use a soft hammer in order to seat the ring gear against the shoulder of the flywheel.
Illustration 1 g00513879
Install Tool (A) on the flywheel. Fasten a suitable lifting device to the flywheel.
Place the flywheel in the original position on the crankshaft. Align the arrows on the flywheel and the crankshaft.
Apply 7M-7456 Compound to the threads of eight bolts (1) .
Install eight bolts (1) and the washers. Tighten the bolts evenly to a torque of 300 40 N m (221 30 lb ft).
Check the flywheel runout. Refer to Testing and Adjusting, "Basic Block" for the correct procedure.