PANEL AS 2639328 - Caterpillar

Exhaust RTD Temperature Sensor
4C-6268 Exhaust RTD Temperature Sensor
Hand Held RTD Temperature Probes
4C-6496 Immersion Hand Held RTD Temperature Probe, 3.18 mm (.125 in) diameter4C-6497 Surface Hand Held RTD Temperature Probe, 6.35 mm (.25 in) diameterBlowby Sensors for Analog Channels
8T-2685 Small Blowby/Air Flow Pickup (Part of 8T-2700 Blowby Group) 131-5066 Auto ID Cable for Small Blowby Pickup 1U-8860 Large Engine Blowby/Air Flow Pickup Group (For 3500 and 3600 Engines)131-5067 Auto ID Cable for Small Blowby PickupPosition Sensor for Analog Channels
8T-1002 Position Sensor 0 to 25 mm (0 to 1.0 in) range 131-5065 Auto ID Cable for 8T-1002 Position Sensor6V-6042 Contact Point Group5P-4814 Fuel Setting Collet9U-6909 Extended Fuel Setting Collet (for 3500 engines)Frequency Channel Sensors
Photo Pickup Speed Sensor
9U-5140 LED Photo Pickup6V-3137 Magnetic Mounting Base for 9U-51406V-3138 Extension Rod for 6V-31371U-6605 Retro-Reflective Tape, 12 mm (.5 in) x 15 m (5.0 ft) long6V-0093 Retro-Reflective Tape, 12 mm (.5 in) x 47.5 m (50 ft) long4C-6919 Retro-Reflective Tape, 25 mm (1.0 in) x 2.5 m (100 in) longInjection Line Speed Sensor
6V-4950 Injection Line Pickup Group (from Multitach Group) 4C-6821 Injection Line Pickup Group (from Data Logger Group)Tach Generator Speed Sensor
9U-7506 Magnetic Adapter Cable5P-7360 Tach Generator (20 tooth internal gear)5P-1759 Tachometer Drive GroupFlywheel TDC Magnetic Speed Sensors
9U-7506 Magnetic Adapter Cable8T-5184 Magnetic TDC Pickup 89 mm (3.5 in) long6V-2197 Magnetic TDC Pickup 114 mm (4.5 in) long8T-5185 Magnetic TDC Pickup 178 mm (7.0 in) long9U-7506 Magnetic Adapter Cable (required for TDC Sensors) 6V-2199 Sensor Mounting Adapter, 1/8 in NPTF 6V-3093 Sensor Mounting Adapter, 1/4 in NPTF7X-1171 Sensor Mounting Adapter, 7/16-20 Straight ThreadMagnetic Pickup Speed Sensors
8L-4171 General Purpose Magnetic Speed Sensor, 91 mm (3.5 in) long, 5/8-18 Thread 9G-6724 Magnetic Speed Sensor, 76 mm (3.0 in) long, 3/4-16 Thread6V-4156 Adapter Cable (required for above sensors), Amphenol to Phono Jack9U-7506 Magnetic Adapter Cable (required for above sensors) Phono Jack to DataViewFuel Flowmeters and Fuel Flow Communicator
1U-9500 Fuel Flow Communicator1U-5450 Complete Engine Fuel Flow Monitor Arrangement 4C-9764 Fuel Flow Monitor Group4C-9758 Fuel Flowmeter Group, Supply, Small 4C-9759 Fuel Flowmeter Group, Return, Small4C-9760 Fuel Flowmeter Group, Supply, Large4C-9761 Fuel Flowmeter Group, Return, Large 1U-5305 Adapter Group, Hose, Small1U-5306 Adapter Group, Hose, Large 1U-5420 Adapter Group, Hose, 3600 Engine 1U-5299 Case Assembly1U-5430 Small to Medium Engine Fuel Flow Monitor Arrangement1U-5440 Medium to Large Engine Fuel Flow Monitor ArrangementHydraulic Flowmeters for Frequency Channels
The 131-5056 Adapter Cable is required to use the following flowmeters.
4C-9911 Hydraulic Flowmeter, 8 to 50 Lpm (2 to 12 gpm) 4C-9436 Hydraulic Flowmeter, 12 to 120 Lpm (3 to 25 gpm)4C-9912 Hydraulic Flowmeter, 20 to 220 Lpm (5 to 50 gpm)4C-9913 Hydraulic Flowmeter, 30 to 300 Lpm (8 to 80 gpm)4C-8687 Hydraulic Flowmeter, 45 to 450 Lpm (10 to 100 gpm)4C-9914 Hydraulic Flowmeter, 50 to 550 Lpm (12 to 150 gpm)4C-8686 Hydraulic Flowmeter, 60 to 700 Lpm (15 to 180 gpm)Reference
Tool Operating Manual; NEHS0662, Using the Caterpillar DataView; Marketing Brochure; NEHP5622, Caterpillar DataView