PANEL 2878562 - Caterpillar

Illustration 1 g01432945
Left side view of engine
Illustration 2 g01432946
Front view of engine
(1) Lubricate the bore of the O-ring seal lightly with lubricant that is being sealed. Use the following procedure to tighten the bolts:
Torque bolts (4) to 47 9 N m (35 7 lb ft).
Torque bolts (2) to 5 3 N m (45 27 lb in).
Torque bolts (3) to 47 9 N m (35 7 lb ft).
Again torque bolts (2) to 47 9 N m (35 7 lb ft).
Illustration 3 g01420429
Section C-C
(D) Length for applying 154-9731 Thread Lock Compound on the two taperlock studs ... 8 mm (0.3 inch) (5) Torque for two taperlock studs ... 80 15 N m (60 11 lb ft)