2995940 PANEL GP-ELECTRICAL Caterpillar parts
C2.2, C3.3, C4.4, C6.6
Rating:
Alternative (cross code) number:
CA2995940
299-5940
2995940
CA2995940
299-5940
2995940
GENERATOR SET,
Information:
Explosion Hazard (4)This safety message is located on the left side of the machine near the battery.
Illustration 5 g03229317
Personal injury can result from improper troubleshooting and repair procedures.The following troubleshooting and repair procedures should only be performed by qualified personnel familiar with this equipment.
Crushing Hazard (5)This safety message is located on both sides of the lift arm.
Illustration 6 g03094656
Stay clear of the work tool during operation. Entanglement could result in personal injury or death.
Crash Hazard (6)This safety message is located on both sides of the counterweight.
Illustration 7 g03094657
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Falling Hazard (7)This safety message is located near the top of the hydraulic tank.
Illustration 8 g03353725
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
Steering Hazard (8)This safety message is attached to the steering wheel.
Illustration 9 g03353782
Machine can not be controlled with the steering frame lock link installed. To avoid possible injury, disconnect lock link and secure to the retaining plates before operating the machine. Steering frame lock link connects the front and rear frames near the center of the machine.
Burn Hazard (9)This safety message is located near the top of the hydraulic tank.
Illustration 10 g03283185
Burn Hazard: Engine components may be hot during and after machine operation.Hot components can cause serious personal injury. Do not contact hot components with bare skin.
High Pressure Hazard (10)This safety message is located near the steering wheel.
Illustration 11 g03354221
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Illustration 5 g03229317
Personal injury can result from improper troubleshooting and repair procedures.The following troubleshooting and repair procedures should only be performed by qualified personnel familiar with this equipment.
Crushing Hazard (5)This safety message is located on both sides of the lift arm.
Illustration 6 g03094656
Stay clear of the work tool during operation. Entanglement could result in personal injury or death.
Crash Hazard (6)This safety message is located on both sides of the counterweight.
Illustration 7 g03094657
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Falling Hazard (7)This safety message is located near the top of the hydraulic tank.
Illustration 8 g03353725
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
Steering Hazard (8)This safety message is attached to the steering wheel.
Illustration 9 g03353782
Machine can not be controlled with the steering frame lock link installed. To avoid possible injury, disconnect lock link and secure to the retaining plates before operating the machine. Steering frame lock link connects the front and rear frames near the center of the machine.
Burn Hazard (9)This safety message is located near the top of the hydraulic tank.
Illustration 10 g03283185
Burn Hazard: Engine components may be hot during and after machine operation.Hot components can cause serious personal injury. Do not contact hot components with bare skin.
High Pressure Hazard (10)This safety message is located near the steering wheel.
Illustration 11 g03354221
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Caterpillar SIS machinery equipment:
Caterpillar SIS
C3.3 Generator Set N3C00001-UP »
299-5940
PANEL GP-ELECTRICAL
C4.4 Generator Set N4D00001-UP »
299-5940
PANEL GP-ELECTRICAL
C4.4 Generator Set N4E00001-UP »
299-5940
PANEL GP-ELECTRICAL
C6.6 Generator Set N6D00001-UP »
299-5940
PANEL GP-ELECTRICAL
C2.2 Generator Set GBE00001-UP »
299-5940
PANEL GP-ELECTRICAL
C4.4 Generator Set D4B00001-UP »
299-5940
PANEL GP-ELECTRICAL
C4.4 Generator Set GLD00001-UP POWERED BY C4.4 Engine »
299-5940
PANEL GP-ELECTRICAL
Caterpillar parts catalog:
Parts panel Caterpillar catalog:
3249515
PANEL AS-TOP
C4.4
C4.4
3249516
PANEL AS-TOP
C4.4
C4.4
3816145
PANEL AS
C4.4
C4.4
3816147
PANEL AS
C4.4
C4.4
3816149
PANEL AS
C4.4
C4.4
3816158
PANEL
C4.4
C4.4
1726874
PANEL GP-ELECTRONIC
PM-465
PM-465
3248047
PANEL GP-CONTROL
3516C, C175-16, C27, C32
3516C, C175-16, C27, C32
2512175
PANEL GP-POWER SUPPLY
UPS 250
UPS 250
3161822
PANEL GP-CONTROL
G3512E, G3516C, G3520C, G3520E
G3512E, G3516C, G3520C, G3520E
4205359
PANEL GP-CONTROL
UPS 750
UPS 750
2034375
PANEL GP-POWER SUPPLY
UPS 250
UPS 250
2668873
PANEL GP-ELECTRICAL
C2.2, C3.3, C4.4
C2.2, C3.3, C4.4
2452162
PANEL GP-SWITCH
R1300G, R1300G II
R1300G, R1300G II
3378204
PANEL AS-BOX
3516C
3516C
3870064
PANEL GP-ELECTRONIC
3512C, 3516C, C175-16, C280-12, C280-16
3512C, 3516C, C175-16, C280-12, C280-16
4373706
PANEL GP-ELECTRONIC
3512C, 3516C, C175-16
3512C, 3516C, C175-16