PANEL A 2P2309 - Caterpillar

Any adjustment to the governor must be made only by a person approved by Caterpillar or a Caterpillar Dealer.(1) Setscrew. Adjustment for fuel ratio control.(2) Nut. Tighten to a torque of ... 1.70 0.25 N m (15 2 lb in)(3) Dimension at shutoff. With manual shutoff lever (3) at the maximum shutoff position, the distance from the end of the lever assembly to the face of the rear governor housing must be ... 28.8 0.5 mm (1.13 .02 in)(4) Setscrew. This setscrew is used for the adjustment of dimension (3) on engines that use a shutoff detent.(5) Nut. Tighten to a torque of ... 1.70 0.25 N m (15 2 lb in)(6) Broken link spring. See the Miscellaneous Spring Chart.(7) Torque for screws ... 3.4 0.5 N m (31 4 lb in)(8) Spring to center of preload the flyweights. See the Miscellaneous Spring Chart.(9) Dashpot spring. See the Miscellaneous Spring Chart.(10) Governor spring. See the Governor Spring Chart.(11) Overfueling spring. (if equipped) See the Miscellaneous Spring Chart.(12) Tighten the insulated terminal in governor housing to a torque of ... 4.5 0.5 N m (40 4 lb in)(13) Setscrew. Adjustment for torque rise setting.(14) Setscrew. Adjustment for fuel setting.(15) Nut. Tighten the nut on setscrews (13) and (14) to a torque of ... 1.70 0.25 N m (15 2 lb in)(16) Bumper spring. See the Miscellaneous Spring Chart.