PANEL AS 3216169 - Caterpillar

Cold Hydraulics Protection
When the hydraulic oil temperature is low and the request for engine speed is increased, the engine speed will increase slowly.Extended Idle
When idling the engine for extended periods, set the engine to a minimum of 1250 RPM. Elevated idle ensures proper lubrication of engine components.Operator Presence Determination
The machine operation is enabled or the machine operation is disabled, based on the operator presence status. The operator presence status will be set to "Operator Not Present" if one of the following conditions is true:
The left armrest is tilted upward.
The operator is not sensed in the seat.
The brake pedal is not depressed.
The travel speed is zero.In all other situations, the operator presence status will be set to "Operator Present".If the operator presence status is "Operator Not Present", the transmission and implement controls will be inoperable.If the operator presence status changes from "Operator Not Present" to "Operator Present", the parking brake switch must be engaged and then disengaged in order to allow the transmission and implements to be activated.If the operator presence status changes from "Operator Present" to "Operator Not Present" with the machine in motion, the machine will not stop. If the machine is in motion, the machine will stop immediately when the left armrest is raised.Machine Operation
V-Pattern Hystat and Steering Pedals (If Equipped)
In order to prevent injury, make sure that no personnel are on the machine or near the machine. To prevent injury,