PANEL GP-CIRCUIT BREAKER 3567100 - Caterpillar

Illustration 1 g00453612
The Caterpillar Monitoring System is an electronic monitoring system that continuously monitors machine systems. The monitoring system has three display panels. The monitoring system includes the gauge display (3), the speedometer/tachometer display (2), and the monitoring system display (1) .Monitoring System Display
Illustration 2 g00453613
The monitoring system display has alert indicators (4) which show any abnormal condition of the machine.The monitoring system display also has display window (5). The display window provides a readout that shows machine operational hours (hour meter), engine speed (tachometer), travel distance (odometer), or diagnostic codes.Indicator (6) displays the results in degrees Celsius, kPa, miles, km, rpm, and liters. The units of measurement for the data are determined by the properties of the data.Indicator (7) displays the hours of operation of the machine.Indicator (8) displays an active diagnostic code.Speedometer/tachometer display
Illustration 3 g00453615
Tachometer (9) shows engine speed (rpm).Digital speedometer (10) shows the ground speed (mph and km/h).Gear/direction readout (11) shows the transmission gear and the direction of the machine.Gauges
The gauge performs a self test by cycling the gauge needles straight upward. Then, the gauge needles go to the far right position (maximum) and to the far left position (minimum). At the end of the self test, the gauge will display the correct information.
Illustration 4 g00453684
Coolant Temperature (1) - The gauge indicates the temperature of the engine coolant. The red area is excessive engine coolant temperature.
Transmission Oil Temperature (2) - The gauge indicates the temperature of the transmission oil. The red area is excessive oil temperature.
Hydraulic Oil Temperature (3) - The gauge indicates the temperature of the hydraulic oil. The red area is excessive oil temperature.
Fuel Level (4) - The gauge shows the amount of fuel in the fuel tank.