PANEL AS 3845267 - Caterpillar

3845267 PANEL AS Caterpillar parts 735B, 740B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3845267
384-5267
3845267

Weight: 19 pounds 8 kg.

Buy PANEL AS 3845267 Caterpillar genuine, new aftermarket tractor parts with delivery
ARTICULATED TRUCK, EJECTOR TRUCK,

Compatible equipment models: 3845267:

ARTICULATED TRUCK 735B 740B

EJECTOR TRUCK Caterpillar

Number on catalog scheme: 31

Caterpillar 3845267 Parts scheme PANEL AS

For full view, you need register

Information:

Electronic Control Module (ECM) - Flash Program
Perform the following procedure in order to flash program the ECM. The ECM is flashed in order to upgrade the software. The new software will allow the ECM to communicate with the AccuGrade - Laser System. The Caterpillar Electronic Technician (ET) contains the program WinFlash. WinFlash is used in order to load software into the ECM. The following procedure is used in order to FLASH software into the ECM.
Procedure
Connect the 7X-1425 Data Link Cable between the 7X-1700 Communication Adapter and the Electronic Technician.
Connect the 139-4166 Data Link Cable between the 7X-1700 Communication Adapter and the diagnostic connector of the machine.
Use WinFlash in order to load the software.Note: Flash programming is NOT allowed if the engine is running, or the machine is moving.AccuGrade Laser System Components - Flash Program
Perform the following procedure in order to flash program the system components. The system components are flashed in order to upgrade the software. The new software will allow the system components to communicate with the ECM and each other. The Caterpillar Electronic Technician (ET) contains the program WinFlash. WinFlash is used in order to load software into the system components. The following procedure is used in order to FLASH software into the system components.
Do not stop the process. The ECM will be damaged and need to be replaced.
Procedure
Connect the 7X-1425 Data Link Cable between the 7X-1700 Communication Adapter and the Electronic Technician.
Connect the 139-4166 Data Link Cable between the 7X-1700 Communication Adapter and the diagnostic connector of the machine.
Use WinFlash in order to load the software.Note: Flash programming is NOT allowed if the engine is running, or the machine is moving.