PANEL 3953417 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Illustration 1 g01133357
Remove bolts (1) and guard assembly (2) .
Remove bolts (4) and guard assembly (3) .
Illustration 2 g01133358
Disconnect hose assemblies (5), (6), and (7). Disconnect harness assembly (8) .
Disconnect clip (11). Remove bolts (9) and parking brake control valve (10) .Installation Procedure
Illustration 3 g01133358
Position parking brake control valve (10) and install bolts (9). Connect clip (11) .
Connect hose assemblies (5), (6), and (7). Connect harness assembly (8) .
Illustration 4 g01133357
Position guard assembly (3) and install bolts (4) .
Position guard assembly (2) and install bolts (1) .End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".