PANEL- 4320729 - Caterpillar

that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Battery - Recycle
Battery - Replace
Coolant - Change
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Daily
Air Prelube Pump Lubricator Oil Level - Check
Air Tank Moisture and Sediment - Drain
Control Panel - Inspect/Test
Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Check/Clean
Engine Oil Level - Check
Fuel Filter Differential Pressure - Check
Walk-Around Inspection
Every Week
Jacket Water Heater - Check
Every 250 Service Hours
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Initial 750 Service Hours
Valve Stem Projection - Measure/Record
Every 750 Service Hours
Aftercooler Core - Inspect/Clean/Test
Battery Electrolyte Level - Check
Coolant Sample (Level 1) - Obtain
Crankshaft Vibration Damper - Inspect
Engine Oil and Filter - Change
Engine Valve Rotators - Inspect
Hoses and Clamps - Inspect/Replace
Ignition System Timing - Check/Adjust
Spark Plugs - Inspect/Adjust/Replace
Every 1500 Service Hours
Crankcase Blowby - Test/Record
Cylinder Pressure - Test/Record
Engine Crankcase Breather - Clean
Engine Protective Devices - Check
Engine Speed/Timing Sensor - Clean/Inspect
Engine Valve Lash - Check
Every 3000 Service Hours
Air Prelube Pump Lubricator Bowl - Clean
Alternator - Inspect
Auxiliary Water Pump (Bronze Impeller) - Inspect/Replace
Coolant Sample (Level 2) - Obtain
Coolant Temperature Regulator - Replace
Driven Equipment - Check
Exhaust Piping - Check
Ignition System Transformer Resistance - Test
Inlet Air System - Check
Starting Motor - Inspect
Water Pump - Inspect
Every 8000 Service Hours
Turbocharger - Inspect
Between 8000 and 12 000 Service Hours
Overhaul (Top End)
Overhaul Considerations
Valve Stem Projection - Measure/Record
Between 18 000 and 24 000 Service Hours
Overhaul (Major)
Overhaul Considerations
Commissioning
Valve Stem Projection - Measure/Record