PANEL GP-CIRCUIT BREAKER 4841091 - Caterpillar

Seat Adjustment
Standard Suspension Seat
Illustration 1 g00806177
Standard Suspension SeatFore/aft Lever (1) - Lift the fore/aft lever and slide the seat forward or backward to the required position. Release the fore/aft lever in order to lock the seat in place.Lever for Adjusting the Backrest (2) - The operator must be in position on the seat before making the adjustment for the backrest. Pull the lever upward and lean forward or lean backward until the desired position is obtained. Release the lever in order to lock the backrest in place.Adjustment Knob for the Lumbar Support (3) - The lower part of the backrest can be set in one of five positions to vary the angle of the backrest.
Handle for Adjusting the Seat Height (4) - The operator must be in position on the seat before making the adjustment for the seat height. Release the handle for adjusting the height of the seat. Rotate the handle clockwise in order to raise the seat. Rotate the handle counterclockwise in order to lower the seat. Check indicator (6) for the correct ride height. If the indicator is in the green zone then the seat is at the correct height for the operator. If the indicator is in the red zone the seat is at the incorrect height for the operator and the seat must be adjusted. There is 75 mm (3 inch) of height adjustment on the seat.
Adjustment Knob for Upward Travel of the Seat (5) - The variable control knob limits upward travel of the seat. Incremental adjustment is indicated on the control knob. Air Suspension Seat
Illustration 2 g00806181
Air Suspension SeatFore/aft Lever (7) - Lift the fore/aft lever and slide the seat forward or backward to the required position. Release the fore/aft lever in order to lock the seat in place.Adjustment Knob for the Lumbar Support (8) - The lower part of the backrest can be set in one of five positions to vary the angle of the backrest.
Knob for Adjusting the Seat Height (9) - The operator must be in position on the seat before making the adjustment for the seat height. Pull the knob outward in order to lower the height of the seat. Push the knob inward in order to raise the height of the seat. Check indicator (10) for the correct ride height. If the indicator is in the green zone then the seat is at the correct height for the operator. If the indicator is in the red zone the seat is at the incorrect height for the operator and the seat must be adjusted. There is 75 mm (3 inch) of height adjustment on the seat.