PANEL AS-LH 6W3390 - Caterpillar

Illustration 3 g03431941
(F) System message
The screen will briefly show a message (F) to say that the selected operator has been applied.
Illustration 4 g03431946
(C) Name of current selected operator
The screen will then change to the Performance Menu and the operator name (C) will be at the bottom of the menu.
Illustration 5 g03431957
(C) Name of current selected operator (G) Current operator totals
A record will be created in the memory and operator totals (G) will be incremented from zero.No Change of Operator, but Reset of Operator Totals
Illustration 6 g03431968
(A) Highlighted operator name (C) Name of current selected operator (E) "OK" button
If the current selected operator (C) that is identified by the "Select Operator" menu is the same as the operator returning to use the machine for work and the operator needs to reset the Operator Totals to start from zero, then the operator needs to press the "OK" button (E) to select the operator name and reset the totals.
Illustration 7 g03431982
(F) System message
The screen will briefly show a message (F) to say that the selected operator has been applied.
Illustration 8 g03431987
(C) Name of current selected operator
The screen will then change to the Performance Menu and the operator name (C) will be at the bottom of the menu.
Illustration 9 g03431989
(C) Name of current selected operator (G) Current operator totals
A record will be created in the memory and operator totals (G) will be incremented from zero.No Change of Operator and Continuation of Operator Totals from Last Values
Illustration 10 g03431991
(A) Highlighted operator name (C) Name of current selected operator (E) "OK" button
If the current selected operator (C) that is identified by the "Select Operator" menu is the same as the operator returning to use the machine for work and the operator needs to continue incrementing the Operator Totals from the last values stored in the memory, then the operator must NOT press the "OK" button (E). The operator should leave the menu alone.
Illustration 11 g03431992
(F) System message
After 30 seconds, the screen will show a message (F) to say that the menu has timed out and the previous operator has been selected.
Illustration 12 g03432002
(C) Name of current selected operator
The screen will then change to the Performance Menu and the operator name (C) will be at the bottom of the menu.
Illustration 13 g03432009
(C) Name of current selected operator (G) Current operator totals
The current Operator Totals (G) will be incremented from the last values.Note: In this last situation, the operator can skip waiting 30 seconds for the "Select Operator" menu to change to the Performance Menu. Press the Back Button. This option maintains the previous operator as the current operator. The option is not available in 431-6724 Monitor Software Gp . Refer to Service Magazine, SEPD1650, "New Monitor Software is Now Used on Certain Articulated Trucks" for information on the availability of the software.