PANEL 9G9166 - Caterpillar

9G9166 PANEL Caterpillar parts 571G, 594H, D7G, D8K, D9H

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9G9166
9G-9166
9G9166

Weight: 0.15 pounds 0 kg.

Buy PANEL 9G9166 Caterpillar genuine, new aftermarket tractor parts with delivery
PIPELAYER, TRACK-TYPE TRACTOR,

Compatible equipment models: 9G9166:

PIPELAYER 571G 594H

TRACK-TYPE TRACTOR D7G D8K D9H Caterpillar

Number on catalog scheme: 25

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 390-1131 Timing Pin (Crankshaft) 1 Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Illustration 1 g02942738
Follow Step 1.a through Step 1.c in order to install the crankshaft positioning tool.
Remove plug (4) from Position (X) in the cylinder block.
Remove O-ring seal (3) from plug (4).
Install Tooling (A) into the cylinder block in Position (Z). Note: Tooling (A) must be located in Hole (Y) in the crankshaft.Note: Ensure that Tooling (A) is located in the correct drilling in the crankshaft as shown in Illustration 1.
Illustration 2 g02942696
Illustration 3 g02942756
Remove bolts (6) from rocker shaft (4) in the reverse numerical sequence shown in Illustration 3.
Remove rocker shaft (4) from the cylinder head.
Make temporary identification marks on push rods (5). Remove the push rods from the cylinder head.
Remove wear caps (3) from the valve stems. Identify the position of the wear caps in order for the wear caps to be installed in the original location.
If necessary, remove dowel (7) (not shown).